Table, For Use In A Collective Cafeteria, With 6-Seater Chair. The Table Must Be Composed Of Modular Tops Made Of High-Impact, Injected Abs, Formed By Modules That Are Fixed To The Structure Using Fittings, With 4 Fittings On The Sides Of The Table (2 On Each Side) And 3 Central Fittings Per Module. 4 Screws Per Module. The Structure Must Be Formed By A Frame Made Of 1010/1020 Steel Tube Of 20X40mm Section With 1.2Mm Composed Of 3 Crossbeams And 2 Headboards. The Legs Must Be Manufactured In Steel Tube 1010/1020 1.1/2X0, 9Mm Wall And Fitted Without The Use Of Screws. At The Lower End Of Each Leg There Must Be A Height-Adjustable Shoe For Leveling The Table, Made Of Polypropylene. All Metal Parts That Make Up The Table Must Receive Anti-Corrosion Treatment And Epoxy Paint. The Table Must Be Accompanied By 06 (Six) Chairs. Chairs: The Seat Of The Chairs Must Be Made Of Injected Polypropylene And Anatomically Molded, Chair, Fixed, Medium Back, Without Armrests, Upholstered In Vinyl Or Ecological Leather In Black Base, Fixed Structure, With 4 Legs In Structural Steel Tube, With Degreasing, Pickling And Fostatization Treatment, Painted With Epoxy Powder Paint, With Protective Shoes, 4 (Four), Made Of Polypropylene Or Nylon, Fitted And Fixed To The Base. Backrest And Seat With Backrest Dimensions 450 X 380 Mm (Width X Height) And Seat Dimensions 450 And Lumbar, Separated And Interconnected By Steel Structure, With Degreasing, Pickling And Fostatizing Treatment, Painted With Epoxy Powder Paint. Vinyl Or Ecological Leather Covering In Black, Resistant To Light, Friction And Tears. Structured Seat And Back In High-Resistance, Non-Deformable And Molded Multi-Laminated Wood Or Polyester Resin Or Polypropylene, With A Minimum Thickness Of 10Mm. Upholstery, Sofa, 3 Seater, Executive, With Arms, Minimum Width For Seat Between Arms 1800 Mm, Minimum Total Depth 850 Mm, Minimum Total Height 790 Mm. Backrest And Seat With A Central Structure To Allow The Accommodation Of The Back And Lumbar Regions With An Anatomical Design, Separated And Interconnected By A Structure Made Of Treated Eucalyptus Or Pine Wood, With A Support System Made Up Of Interlaced Elastic Straps. Upholstery In Flexible Polyurethane Foam, Anatomically Molded With A Minimum Thickness Of 40 Mm On The Back And Seat. Vinyl Or Ecological Leather Covering In Black, Friction And Tears. Side Arms Made Of Treated Eucalyptus Or Pine Wood, Upholstered In Flexible Polyurethane Foam, Covered In Vinyl Or Ecological Leather In Black, Friction And Tears, Support Area With A Minimum Width Of 150 Mm. Side Feet, Made Of Wood, With Section
|