Dining Room Set With Injected Childrens Top 08 Seats. Table Made Of Abs Resin, With An Oval Top Measuring 2400Mm Long By 800Mm Wide. Top Fixed To The Structure Using Screws, With The Manufacturers Mark Injected In Relief On The Top. Top/Floor Height 590Mm. Table Top Base In Square Tube Measuring 25Mm Across The Entire Length Of The Table. 02 Side Vertical Columns Connecting The Top To The Feet In Oblong Tubes Measuring 77Mm X 40Mm With A Minimum Thickness Of 1.2Mm. Foot Base In Oblong Tube Measuring 20Mm X 48Mm With A Thickness Of 1.5Mm In The Shape Of An Arc. A Support Bar In Oblong Tube Measuring 20Mm X 48Mm Fixed Between The Columns. Non-Slip Calendered Shoes Wrapping The Ends Of The Tubes That Make Up The Feet, Performing The Function Of Paint Protection, Increasing Durability, Follow The Shape Of The Arched Feet, Measuring Approximately 162Mm X 53Mm, Made Of Virgin Polypropylene, And Can Be Injected In The Same Color Top And Attached To The Structure By Screws. The Entire Metallic Structure Is Manufactured From Industrial Steel Tubes Treated By Sets Of Chemical Baths For The Protection And Longevity Of The Structure And Welded Using The Mig System. Structure Color: White. Chair With Seat And Back In Virgin Plastic Resin, Manufactured Using Thermoplastic Injection Process, Manufacturers Mark Injected In High Relief Shall Be On The Back. Seat With Minimum Measurements 340Mm Backrest With Minimum Measurements 340Mm X 330Mm With Handle To Facilitate Loading The Chair, Fixed Using Screws. Non-Slip Calendered Shoes Wrapping The Ends, Performing The Paint Protection Function, Preventing Against, Student Set Size 6 Adult: School Furniture Consisting Of Two Independent Elements (1) Table And (1) Chair. Table With Rectangular Shaped Top Made Of Abs (Acrylonitrile Butadiene Styrene), Virgin, Free Of Mineral Fillers, Injected. Top Measuring At Least 600Mm Wide, 453Mm Deep, Edge In Contact With The User 23Mm, Front And Side Edge 43Mm. Pen Holder On The Entire Front Part Of The Top Connected To The Cup Holder, Measuring At Least 28Mm Wide, 475Mm Long And 12Mm Deep. Cup Holder Measuring At Least 76Mm In Diameter. Top To Floor Height 760Mm. Table Structure Made Of Industrial Steel Tubes Measuring 20Mm X 20Mm, Forming The Base Of The Top And The Book Holders. U-Shaped Feet Allowing The Table To Be Stacked. Foot Connection Bar In Industrial Steel Tube Measuring 20Mm X 20Mm. Industrial Steel Top Bar Measuring 16Mm X 30Mm. Tips, For The Protection Of The Feet, Made Of Black Polypropylene, Measuring 20 Mm Chair With 4 Legs Allowing Stacking, With Interconnected Seat And Back, In Virgin Plastic Resin, Manufactured Using The Thermoplastic Injection Process. Seat With Minimum Measurements 400Mm X 460Mm, Fixed By Screws. Seat To Floor Height Approximately 460Mm. Backrest With Minimum Measurements 400Mm X 360Mm, With Handle For Faci
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 79564612
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.