Bids Are Invited For Acquisition Of A 4-Petal Pole And Lamp Set, An Ornamental Pole And Lamp Set, And A Repl ...
Tender Notice
TenderID
79446132
Tender Brief
Bids Are Invited For Acquisition Of A 4-Petal Pole And Lamp Set, An Ornamental Pole And Lamp Set, And A Replacement And Repair Kit To Cover The Public Lighting Of This Municipality, For A Period Of 12 Months.
Set Of Pole And Lamp 4 Petals With: Decorative Lighting Pole, Made Of Sae 1010/1020 Steel, Straight Central Teleconic Mast, Without Inspection Window, 8.5 Meters Free From The Ground With Base And Anchors. Made Of Carbon Steel, With A Top Diameter Of 75 Mm And A Base Of 127 Mm. Four 5/8 Diameter Anchor Bolts With 850Mm Length, Welded In The Form Of A Jig, With Nuts And Washers For Fixing The Post, Post With Hot Dip Galvanized According To Nbr6323 Standards, And Subsequently Painted With Electrostatic Polyester Powder Paint With Curing 220º, Post Contains Core. It Will Have A Support For 4 Petals, Separate From The Pole, With A Diameter To Fit On The Top Of A Pole With 75Mm, With Headless Allen Fixing Screws, Fitting Of Luminaires Up To 53Mm, Arm Length Between 400 And 600Mm, Pole With 4 Luminaires Petal Type, 200 Watts Each. Each Luminaire Has 200 Watts Of Power And Has Mcpcb Led Boards. Only Luminaires With Leds In Smd Assembly Will Be Accepted. Sealing Degree Of At Least Ip66. The Luminaire Has A Luminous Flux Of 30,000 Lumens And A Maximum Consumption Power Of 200W. The Luminaire Is Available With A Color Temperature Of 5000-5500K, And The Color Repeatability Index (Irc) For This Color Temperature Is At Least 70%. The Leds In This Configuration Have An Efficiency Of 150Lm/W. Led Lifetime Of 100,000 Hours. Only Luminaires With An Individual Driver (Off Board), With A Sealing Rating Of At Least Ip66, Will Be Accepted. Power Supplies (Drivers) Must Be Constant Current With Bivolt Input Voltage And Output Current Of 2.8A, Power Factor Greater Or Equal To 0.95 And Thd Less Than 20%. Drivers Ta And Tc Are 60 And 90 Degrees. Luminaire Painted With Electrostatic Polyester Paint At 220ºc In Color To Be Defined. A) Technical Characteristics Module: Power D, Set Of Pole And Ornamental Luminaire With: Free From The Ground, With Base And 4 1/2X 400 Mm Anchors Welded In The Form Of A Jig With Nuts And Washers, Without Inspection Window. Manufactured From Carbon Steel Sheet In A Single Piece, With A Base Diameter Of 101 Mm And A 50 To 57 Mm Tip At The Top For Installing The Luminaire. The Post Must Be Painted With Electrostatic Polyester Paint At 220ºc In The Color To Be Defined. B) Luminaire For Decorative Lighting, Conical Shape With Aluminum Body Painted With Electrostatic Polyester Powder Paint At 220ºc In Color To Be Defined; Diffuser In Transparent Polycarbonate Resistant To Impact And Uv Radiation Aluminum Reflector Painted With Electrostatic Polyester Powder Painting At 220ºc White Microtextured; Housing For Auxiliary Equipment On Top Of Luminaire; Top Cover In Stamped Aluminum Painted In The Color To Be Defined; Sealing Gasket In Polymethylsiloxane Silicone Garnish Fixed Under Pressure On The Perimeter Of The Diffuser Resistant To Temperatures Of Up To 200 ºc; Fixing The Power Cable Using A Cable Gland; External Screws, Nuts And Washers In Stainless Steel. Fastening To The Top Of A 57Mm External Diameter Post, Using Headless Allen Screws. The Optical Set Must Have A Minimum Protection Of Ip66 And Ik08, And Have Translucent Lenses For Distributing The Light Beams Made Of Thermo-Resistant Polymers. This Lens(Es) Must Be Fixed Using Weather-Resistant Screws. Lenses Will Not Be Accepted.
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 79446132
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.