1.1- Supply And Placement Of Work Sign Made Of Galvanized Sheet #26, Esp. 0.45Mm, Dimension (3X1.5)M, Plotted With Vinyl Adhesive, Affixed With 4.8X40mm Rivets, On 20X20mm Metal Structure, Special. 1, 25Mm, Including Support In Autoclaved Eucalyptus Painted With Pva Paint Two (2) Coats., 2.1- Construction Shed, In Resin Plywood Sheet, Including Sanitary Facilities And Furniture - Der-Mg Standard, 3.1- Work Location With Template Of Slatted Boards Pointed Every 2.00M, Reuse (2X), 4.1- Manual Excavation Of Trench With A Depth Of Less Than Or Equal To 1.5M, Including Lateral Discharge, 4.2- Preparation Of The Bottom Of A Trench With A Width Of Less Than 1.5 M (Natural Soil Adjustment). Af_08/2020, 4.3- Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 3 Cm Thick. Af_08/2017, 4.4- Manufacture, Assembly And Disassembly Of Shoe Formwork, In Sawn Wood, E=25 Mm, 4 Uses. Af_06/2017, 4.5- Framing Of Miscellaneous Reinforced Concrete Structures, Except Beams, Pillars, Slabs And Foundations, Using 8.0 Mm Ca-50 Steel - Assembly. Af_0 6/2022, 4.6- Supply Of Structural Concrete, Prepared On Site With A Concrete Mixer, With Fck 25Mpa, Including Placing, Compacting And Finishing (Foundation)., 4.7- Manual Backfilling Of Trenches, With Percussion Soil Compactor. Af_08/2023, 4.8-Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Straight Leg, Made Of Plasticized Plywood Sheet, 18 Uses. Af_09/2020, 4.9- Cutting And Bending Of Ca-60 Steel, Diameter Of 5.0 Mm. Af_06/2022., 4.10- Cutting And Bending Of Ca-50 Steel, Diameter Of 10.0 Mm. Af_06/2022, 4.11- Concreting Of Pillars, Fck = 25 Mpa, Using Buckets - Laying, Densifying And Finishing. Af_02/2022, 4.12- Surface Waterproofing With Asphalt Emulsion, 2 Coats. Af_09/2023, 4.13- Manual Excavation Of A Trench With A Depth Of Less Than Or Equal To 1, 4.14- Preparation Of The Bottom Of A Trench With A Width Of Less Than 1, 4.15- Thin Concrete Ballast, Applied To Floors, Slabs On The Ground Or Radiators, Thickness Of 3Cm. Af_07/2016, 4.16- Manufacture, Assembly And Disassembly Of Formwork For Baldrame Beam, 4.17- Cutting And Bending Of Ca-50 Steel, Diameter Of 6.3 Mm. Af_06/2022, 4.18- Cutting And Bending Of Ca-50 Steel, Diameter 8, 4.19- Cutting And Bending Of Ca-50 Steel, 4.20- Cutting And Bending Of Ca-60 Steel, 4.21- Supply Of Structural Concrete, Densification And Finishing (Foundation), 4.22- Surface Waterproofing With Asphalt Emulsion, 4, 23- Mechanical Soil Compaction For Execution Of Radier, Concrete Floor Or Slab On Soil, With Percussion Soil Compactor. Af_09/2021, 4.24- Execution Of A Sidewalk (Sidewalk) Or Concrete Floor With Cast-In-Place Concrete, Made On Site, Conventional Finish, Not Reinforced. Af_08/2022 (E = 5 Cm, Fck = 20 Mpa), 5.1- Assembly And Disassembly Of Rectangular Pillar Formwork And Similar Structures, 5.2- Cutting And Bending Of Ca-60 Steel, 5.3- Cutting And Bending Of Ca-50 Steel , 5.4- Concreting Of Pillars, 5.5- Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, In Plasticized Wood Sheet, 5.6- Cutting And Bending Of Ca-60 Steel, 5.7- Cutting And Bending Of Ca-50 Steel , 5.8- Cutting And Bending Of Ca-50 Steel, 5.9- Cutting And Bending Of Ca-50 Steel, 5.10- Cutting And Bending Of Ca-50 Steel, Diameter Of 12.5 Mm. Af_06/2022, 5.11- Supply Of Structural Concrete, 6.1- Manufacture Of Formwork For Stairs, With 2 U-Shaped Flights And Flat Slab, E=18 Mm. Af_11/2020, 6.2- Cutting And Bending Of Ca-60 Steel, 6.3- Cutting And Bending Of Ca-50 Steel, 6.4-
|