Ca-50 Steel, 10.0 Mm, Rebar, 6.3 Mm, Rebar., 8, Ca-60 Steel, 4.2 Mm, Or 5, Or 6, Or 7, Normal Set Waterproofing Additive For Mortars And Concretes Without Reinforcement, Liquid And Chloride-Free, Plasticizing And Stabilizing Additive For Laying And Plastering Mortars, Reinforced Concrete Ring, Smooth, For Manholes, Inspection Wells, Septic Tanks And Drains, Bottomless, Internal Diameter Of 1.20 M Height 0.50 M, Galvanized Wire 6 Bwg, D = 5.16 Mm (0.157 Kg/M), Or 8 Bwg, D = 4.19 Mm (0.101 Kg/M), Or 10 Bwg, D = 3.40 Mm (0.0713 Kg/M), Annealed Wire 16 Bwg, D = 1.65 Mm (0.016 Kg/M) Or 18 Bwg, 25 Mm (0.01 Kg/M), Sand Grossa - Deposit/Supplier Station (Picked Up At The Deposit, No Transport), Areia Media - Deposit/Supplier Station (Collected At The Deposit, Adhesive Mortar Ac I For Ceramics, Adhesive Mortar Type Ac Iii, Structural Concrete Block 19 X 19 X 39 Cm , Fbk 4.5 Mpa (Nbr 6136), Nylon Bushing Without Flap S10, With 6.10 Of Concrete 19 Iron, 3 1/2 , 5* Mm, 20 Mm Coverage, Mirror Lock For External Door, In Stainless Steel (Machine, Forehead And Counterhead) And Zamac (Handle, Latch And Latches) With Chrome Finish, 40 Mm Machine, Including Cylinder Type Key, Mirror Lock For Internal Door, In Stainless Steel (Machine, Head And Counter) And In Zamac (Handle, 40Mm Machine, Including Internal Type Key., Asphalt-Based Liquid Blanket Modified With The Addition Of Elastomers Diluted In Organic Solvent, Cold Application (Asphalt Waterproofing Membrane), Plastic Putty For Marble/Granite, Zinc Plated Steel Screw With Superb Thread, Flat Head And Single Slot, Diameter 4, Length * 32 * Mm, Nickel-Plated Screw With Chrome Finish To Fix Sanitary Parts, Includes Blind Nut, Washer And Nylon Bushing Size S-10, Zinc Plated Superb Thread Screw Flat Head Single Slotted 3.5 Flat Head, Single Slot, 1/4 (6.35 Mm) (9.5 To 19 Mm) Quarry Station/Supplier, Crushed Stone N. 2 (19 To 38 Mm) Quarry Station/Supplier, Steel Pin With Hole, Rod = 27 Mm (Direct Action), Extra Glazed Ceramic Floor, Pei Greater Than Or Equal To 4, Smaller Or Equal To 2025 Cm², Polished Steel Nail With Head 12 X 12, Polished Steel Nail With Head 15 X 15 (1 1/4 X 13), Polished Steel Nail With Head 17 X 21 (2 X 11), Polished Steel Nail With Head 17 X 24 (2 1/4 X 11), Polished Steel Nail With Head 17 18 X 30 (2 3/4 Polished Steel With Double Head 17 X 27 (2 1/2 X 11), Polished Steel Nail Without Head 15 X 15 (1 1/4
|