|
1. The Subject Of The Order Is The Delivery In The Form Of Operational Leasing Of A High-Pressure Device For Servicing The Sewage Network And A Mobile Camera For Inspecting The Sewage Network. 2. The Scope Of The Order Includes: 1) Delivery Of A High-Pressure Device For Servicing The Sewage Network, 2) Delivery Of A Mobile Camera For Inspection Of The Sewage Network, 3) Services Related To The Delivery, In Particular: A) Commissioning Of A High-Pressure Device For Servicing The Sewage Network And A Mobile Camera For Inspection Of The Sewage Network, B) Training Of The Ordering Partys Staff In The Operation And Operation Of The Device, C) During The Warranty Period, Mandatory Inspections Of The High-Pressure Device At The Contractors Expense, D) Warranty And Post-Warranty Service At The Ordering Partys Premises. 3. The Delivered Subject Of The Order Must Be Ready For Operation And Have All The Certificates Required By Law, Authorizing Trading And Use. 4. The Delivered Subject Of The Order Must Comply With Generally Applicable Standards And Norms Adopted For This Type Of Devices, Be Approved For Trading And Use In Poland And The Eu, And Meet The Requirements Of Swz. 5. The Delivered Subject Of The Order Must Be Free From Construction, Material, Workmanship And Legal Defects. 6. Basic Leasing Data: Duration 36 Months, Including Initial Rent Of 20% And 35 Monthly Leasing Installments, Fixed Interest Rate, Purchase Amount Of 1%, Leasing In Pln.7. After The Expiry Of The Leasing Contract, After Paying The Last Leasing Rent, The Ordering Party Will Have The Right To Purchase The Leased Property Provided That It Repays All Receivables Under The Leasing Contract.8. The Leasing Rent Will Be Paid Monthly. The Ordering Party Is Obliged To Pay The Leasing Rent In Accordance With The Financial Schedule Constituting An Integral Part Of The Leasing Agreement.9. For The Duration Of The Leasing Contract, The Ordering Party Will Bear The Costs Of Insuring The Leased Item On Its Own And Is Not Obliged To Insure It Through The Contractor, I.E. It Will Have The Opportunity To Use The Offer Of Any Insurer, Including The Contractors Offer, Without The Need To Incur Any Additional Fees To Contractors In Connection With The Selection Of An External Insurance Offer.10. The Contractor Undertakes To Provide The Ordering Party With The Subject Of The Order Meeting The Absolute Minimum Requirements, Technical Parameters And Accessories Specified By The Ordering Party In The Following Specification.11. Requirements For Acceptance: 1) The Contractor Will Notify The Ordering Party About The Delivery Date Of The Machine No Later Than Seven Days Before The Delivery Date. 2) The Acceptance Will Take Place At The Premises Of Gminny Zakład Ujścieeności Publicznej Sp. Z O. O., Krupy 72, 76-150 Darłowo And Will Be Confirmed By A Written Acceptance Protocol. 3) The Acceptance Protocol Signed By The Parties To The Contract Will Be A Confirmation Of The Execution Of The Contract By The Contractor. 4) The Contractor Will Deliver The Subject Of The Order On His Own And At His Own Expense And Responsibility, And Will Enable Its Inspection. 5) The Ordering Party Is Not Liable For Any Damages Incurred During Transport. 6) The Ordering Party Will Only Accept The Subject Of The Order In Accordance With The Swz And The Offer. 7) If The Subject Of The Contract Is Delivered Inconsistent With The Swz Or The Offer, The Ordering Party Will Consider That The Delivery Has Not Been Completed, And The Contractor Will Bear All The Consequences Provided For In The Contract For Failure To Meet The Delivery Deadline Due To The Fault Of The Contractor. 8) If Defects Are Found During Acceptance, The Ordering Party Has The Following Rights: A) If The Defects Are Significant, The Ordering Party May Refuse Acceptance Until The Defects Are Removed, B) If Defects And Faults Are Found During Acceptance, I.E. Those That Do Not Affect The Quality And Do Not Impede Or Prevent The Use Of The Devices. The Ordering Party Will Indicate In The Acceptance Report The Date For The Removal Of Defects And Defects By The Contractor. The Above Provision Does Not Refer To The Technical Parameters Indicated By The Ordering Party In Annex No. 2 To The Swz. Lack Or Non-Compliance Of Any Of The Parameters Indicated In Annex No. 2 To The Swz Will Result In The Inability To Accept The Machine, C) If The Defects Cannot Be Removed, The Ordering Party May Withdraw From The Contract Or Demand Performance Of The Subject Matter Of The Contract For A Second Time, Retaining The Right To Charge The Contractor Penalties. Contractual. 9) The Contractor May Not Refuse To Remove Defects That Were His Fault, Regardless Of The Amount Of Costs Involved. 10) The Parties Agree That The Deadline For The Contractor To Remove Any Defects Found Upon Acceptance Will Be 7 Days, Unless The Parties Decide Otherwise During The Acceptance. 11) The Contractor Is Obliged To Notify The Ordering Party In Writing About The Removal Of Defects. 12) The Risk Of Loss And Damage To The Subject Of The Contract Is Transferred To The Ordering Party Upon The Protocol Acceptance Of The Subject Matter Of The Contract (Signing The Acceptance Report).13) The Contractor Is Obliged To Conduct Free On-The-Job Training On The Day Of Delivery In The Scope Of Current Service, Operation, Maintenance, Making Minor Repairs And Health And Safety Of The Delivered Subject Of The Order For Employees Selected By The Ordering Party.14) The Training Will Take Place On The Premises Of Gminny Zakład Użytełości Publicznej Sp. Z O. O., Krupy 72, 76-150 Darłowo And Will Cover The Full Scope Enabling The Proper Operation Of The Devices. A Training Protocol Will Be Prepared From The Training - Signed By The Parties And The Trained Employees.12. High-Pressure Device For Servicing The Sewage Network:1) Brand New, Year Of Production: Min. 2024.2) The Entire Device Is Placed On An Intermediate Frame.3) Pressure Pump With Operating Parameters: Working Pressure Min. 150 Bar With A Water Flow Rate Of Min. 85 L/Min.4) Pressure Regulator And Pressure Manometer With A Valve (Smooth Regulation Of Pressure And Water Flow).5) System That Automatically Stops The Pump When The Water Level In The Tanks Approaches The Minimum, With The Possibility Of Briefly Turning The Pump On High-Pressure, E.G. To Roll Up A Hose.6) Gasoline Engine With A Minimum Power Of 36 Hp With Electric Start And Direct Fuel Injection.7) Two-Stage Engine Start Via The Ignition Switch Located On The Main Control Panel And Remote Control. 8) Hydrant Connection For Filling The Tank. 9) Water Tanks Made Of Plastic With A Capacity Of Min. 800 L, Equipped With Anti-Wave Partitions And Excess Water Overflow.10) Main Control Panel (Located On The Main Drum With A High-Pressure Hose), Waterproof, Equipped With A Key Switch, Engine Speed Regulation, High-Pressure Pump On/Off Switch, Safety Switch, Low-Pressure Indicator Water Level In The Tank, Joystick For Winding And Unwinding The Working Hose, 12 V Socket.11) Hour Meter And Battery.12) Water Circulation System On Both Hoses - Operation In Winter Conditions.13) Main Drum Mounted On A Tilting Arm In A Horizontal Plane By An Angle 65 Degrees, Additionally The Drum Can Be Rotated By An Angle Of 135 Degrees, Allowing The Hose To Be Placed Directly Above The Well. Hydraulically Wound/Unwinded Drum With Smooth Regulation Of Rotational Speed, With A Capacity Of Min. 80 M Of High-Pressure Hose Dn 16, ½” Connection. 14) Second Auxiliary Drum – Hydraulically Rolled/Unwinded Pressure Hose With 60 M Long Dn 10 Hose, ½” Connection. Drum With Smooth Regulation Of Rotational Speed. 15) Automatic Hose Laying System On The Main Drum Guided By Screw Guides. 16) Remote Control Pilot With Minimal Functions: On/Off, Regulation Of The Devices Engine Speed, Turning On And Off The Pressure Pump, Emergency Shutdown Of The Device, Stepless Regulation Of The Speed Of Unwinding And Winding The Main And Auxiliary Hose, Drum Operation Selection Switch. 17) Emergency Switch.18) Minimum Range 100 M.19) Additional Battery For The Remote Control.20) Possibility Of Blocking The Working Arm In Min. 4 Positions.21) Possibility To Lock The Drum In Min. 7 Positions.22) Possibility Of Loading/Unloading With A Forklift.23) Drainer.24) Maximum Dimensions Of The Device With Tank: Length 1950 Mm X Width 1300 Mmx1250 Mm.25) Accessories: A) Standard Blind Channel Head. B) Channel Head Standard With Remote Control.C) Quarto Unclogging Head.D) Grenade Cleaning Head.E) Swivel Cleaning Head.F) Protective Hose.G) High-Pressure Gun With Lance.H) Magnetic Work Lamp.26) Other Requirements:A) Minimum 24 Months Of Warranty, During The Warranty Period Mandatory Inspections At The Expense Of The Contractor. B) Delivery To The Ordering Partys Headquarters Within 14 Days From The Date Of Signing The Contract. C) Employee Training To Be Held At The Ordering Partys Headquarters. D) Warranty Service At The Ordering Partys Headquarters. E) Service Post-Warranty At The Ordering Partys Headquarters. F) During The Warranty Period, The Response Time Of The Contractors Service Will Be Max. 72 H From The Time Of Written Failure Notification (E-Mail).G) Documents In Polish Delivered With The Device: Technical And Operating Documentation For The Device, Ce Declaration Of Conformity, Warranty Card, Spare Parts Catalog (Electronic Form Of This Document Is Acceptable).13 . Mobile Camera For Inspecting The Sewage Network: 1) Brand New, Year Of Production Min. 2023.2) Camera Operating Range From Dn70 To Dn300.3) 5.6 Tft Monitor With Sd Memory Card Slot.4) Adjustable Bracket On The Reel Frame.5) Metal Housing With Sun Visor.6) Single Images And Video Sequences.7 ) Integrated Keyboard.8) Meter Counter Displayed On Monitor.9) Text Generator: Free Text, Date And Time, Counter Display, Default Counter, 100 Fixed Lines And 10 Fixed Pages.10) Keyboard With Protective Film For Outdoor Use.11 ) Camera Eye With A Diameter Of Ø 40 Mm.C. D. In Swz
|
