Sinapi 103689 Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Sinapi 7047 Trash Motor Pump (For Dirty Water) Self Priming, 6.41 Hp Gasoline Engine, Suction Diameters H - Materials In Operation. Af_10/2014, Sinapi 92415 Assembly And Disassembly Of Rectangular Pillars And Similar Structures, Single Height, Made Of Resin Plywood Sheet, 2 Uses. Af_09/2020 (Cofferdam), Sinapi 102301 Mechanized Trench Excavation With Prof. Greater Than 1.5 M Up To 3.0 M(Average Upstream And Downstream/One Composition Per Section), Backexcavation. (0.26 M3), Width. From 0.8 M To 1.5 M, On Soft Soil, In Places With A High Level Of Interference. Af_02/2021, Sinapi 2788 Pile Driver In Treated Round Wood, D 30 To 34 Cm, H 6.50 M, In Eucalyptus Or Equivalent From The Region, 04/11/2024, Sinapi 96546 Block Frame, Baldrame Beam Or Footing Using Steel 10Mm Ca-50 - Assembly. Af_06/2017, Sinapi 94967 Concrete Fck 40Mpa, Mixture 1:1, 6:1, 9 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 400 L Concrete Mixer, Including Laying, Densification And Finishing. Af_05/2021 (Foundation), Sinapi 103799 Hand Stone Fixed With Concrete For Dissipation Basin, 40% Concrete By Volume, Fck 20 Mpa, With The Use Of Jerica And Preparation In A 600 L Concrete Mixer - Sand, Crushed Stone And Hand Stone Commercial - Launching, Thickening And Finishing. Af_08/2022, Sinapi 96619 Slim Concrete Ballast, Applied To Crowning Blocks Or Footings, 5 Cm Thick. Af_08/2017, Sinapi 102730 Wing Wall Frame And Forewall Using 10 Mm Ca-50 Steel - Assembly. Af_07/2021, Sinapi 94966 Concrete Fck 30Mpa, Mixture 1:2, 1:2, 5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) - Mechanical Preparation With 400 L Concrete Mixer, Densification And Finishing. Af_05/2021, Sinapi 92415 3.3 - Infrastructure (Wings)Assembly And Disassembly Of Rectangular Pillars And Similar Structures, Sinapi-I43082 Metal Beam In Profile I Of Laminated Or Welded Steel In Structural Steel, Parallel Tabs, W, 530X92, With Connections Bolted Including Labor., Sinapi-I43665 Metal Beam In U Profile Of Laminated Steel Or Welded In Structural Steel, U 102 4 Cylinder Engine 600 A - Materials In Operation. Af_02/2016, Sinapi-I43082 4.4. Superstructuremetallic Beam In I-Profile Of Laminated Or Welded Steel In Structural Steel, Sinapi 100950 Transport With Truck Body With Crane (Munck), Maximum Load Moment 11.7 Tm, On Urban Road In Natural Bed (Unit: Txkm).Af_07/2020 , Sinapi 101010 Loading, Maneuvering And Unloading A Metal Profile On A Truck With A Crane (Munck) 11.7 Tm. Af_07/2020, Sinapi 92447 Assembly And Disassembly Of Solid Slab Formwork, Shoring With Wooden Bridge, Simple Straight Foot, In Sawn Wood, 2 Uses. Af_09/2020, Sinapi 92769 Slab Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Sinapi 92770 Slab Frame Of Conventional Reinforced Concrete Structure Using 8.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Sinapi 92771 Slab Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Sinapi 92772 Slab Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2022, Sinapi 94966 4.12. Superstructurecon
|