Labor - Construction Administration, Labor - Rental Of Generator Group *80 To 125* Kva, Diesel Engine, Towable, Manual Drive, Labor - Execution Of Warehouse On Construction Site, In Plywood Sheet, No Furniture And Equipment Included. Af_01/2024_Pe, Labor - Mechanical Demolition Of Reinforced Concrete With Hydraulic Excavator, Labor - Transport With 10 M³ Dump Truck - Natural Bed Highway, Labor - Mechanized Excavation For Crowning Block Or Footing With Backhoe Loader (Including Excavation For Placing Formwork). Af_06/2017, Labor - Trench Shoring, Punching Type, With Depth Of 0 To 1.5 M, Width Greater Or Equal To 1.5 M And Less Than 2.5 M. Af_08/2020, Labor - Location Submersible Pump For Drainage And Sewage, Three-Phase Electric Motor, Power Of 1 Hp, Discharge Diameter Of 2. Operation Range Q=25 M3/H (+ Or - 1 M3/H) And Amt=2 M, Q=12 M3/H (+ Or - 2 M3/H) And Amt = 12 M (+ Or - 2 M), Labor - Lean Concrete Ballast, Applied On Crowning Blocks Or Footings. Af_08/2017, Labor - Manufacture, Assembly And Disassembly Of Shoe Formwork, In Sawn Wood, E=25 Mm, 4 Uses. Af_06/2017, Labor - Block Frame, Baldrame Beam Or Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2017, Labor - Concreting Footings, Fck 30 Mpa, Using A Pump? Laying, Densification And Finishing, With Waterproofing Additive, Labor - Assembly And Disassembly Of Formwork For Rectangular Pillars And Similar Structures, Simple Right Foot, 4 Uses. Af_09/2020, Labor - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 16.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Labor - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 6.3 Mm Ca-50 Steel - Assembly. Af_06/2022, Labor - Concreting Pillars, Fck = 25 Mpa, Using A Pump - Launching, Assembly And Dismantling Of Formwork For Containment Curtain, Made Of Plasticized Plywood Sheet, E = 18 Mm, 10 Uses. Af_07/2019, Labor - Reinforced Concrete Retaining Curtain Frame, With 8 Mm Ca-50 Steel - Assembly. Af_07/2019, Labor - Concreting The Containment Curtain, Using A Launching Pump, Assembly And Disassembly Of Formwork For Baldrame Beam, Sawn Wood, 4 Uses. Af_01/2024, Labor - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2022, Labor - Frame Of Pillar Or Beam Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 10, Labor - Frame Of Pillar Or Beam Of Conventional Structure Of Reinforced Concrete Using Steel Of Ca-50 Of 8, Hand Of Work - Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using Ca-60 5 Steel, Labor - Concreting Beams And Slabs, Fck=25 Mpa, For Precast Slabs Using A Pump - Laying, Densifying And Finishing. Af_02/2022_Ps, Labor - Manufacture Of Formwork For Beams, Made Of Resin Plywood Sheet, E = 17 Mm. Af_09/2020, Labor - Frame Of Pillar Or Beam Of Conventional Reinforced Concrete Structure Using Steel Ca-50 Of 6, Labor - Frame Of Pillar Or Beam Of Conventional Structure Of Reinforced Concrete Using Steel Of Ca-50 Of 16, Hand Of Work - Self-Compacting Concrete (Caa) Resistance Class C30, Spreading Sf2, With Pumping (Availability Of Pump
|