Generator Group 100Kva Open Aut. Trif. 60Hz. With Acoustic Insulated Fairing. Diesel Engine. Automated For Open Transfer.1.1 Synchronous Alternator, Brushless, Insulation Class H, With Vacuum Impregnation, 04 Poles, Single Bearing, Flexible Disc Coupling, Stator Winding With Shortened Pitch, Rotary Exciter, Electronic Voltage And Degree Regulator Ip21 Protection, Voltage 220/127 Vac 380/220 Vac Or 440/254 Vac. Power Of 100Kva, Three-Phase 220V At 60 Hz. 1.2 Stationary Engine, Internal Combustion By Diesel Cycle, Nominal Rotation Of 1800 Rpm, 4 Cylinders In Line, Direct Fuel Injection, Turbocharged, With Speed Regulator, Injection Pump, Water Cooled By Built-In Radiator, Fan And Centrifugal Pump. Equipped With A Protection System Against High Water Temperature And Low Oil Pressure. Other Features: - Filters With Replaceable Elements For Dry Air, Lubricating Oil And Fuel; - Electrical System, Equipped With Alternator For Charging The Battery(S). 1.3 Automation With Automatic Transfer Automatic Control Panel With Kva K30 For Command And Strength, According To Nr10. Allows Manual Operation, Alternating Current System, Generator Command And Stop In Case Of Main Source (Main) Failure, Apparent Power Kva, Active Energy Kwh, Case And Generator Line Voltage Vac, Frequency Hz, Phase A Current. Temperature Water Level, Operating Time, Battery Voltage And Active Alarm Indication, Periodic Testing And Event History.1.4 Unique Base Structure With Sturdy, Integrally Welded Structure, Made Of Welded Steel Plates.1.5 1 (One) Year Warranty Manufacturing Defects. 24H Assistance. Full Or Partial Warranty Will Be Lost If Preventive Maintenance Is Not Carried Out, Such As Changing Oils And Filters, Specified In The Owners Manual. There Is No Warranty..., 5-Seater Stringer, With Seat And Back Made Of Resin-Coated Multi-Laminated Plywood. It Has An Anatomical Curvature With A Thickness Of 15 Mm, Both Covered In Cec With A Clamping System With A Zinc-Plated Finish. Expanded/Laminated Ap Foam, Flexible High-Resistance Microcellular, Cfc-Free, With Controlled Density Of At Least 33 Kg/M³ And Minimum 45 Mm Thickness. Structure Made From 50X50 Mm Square Steel Tube With 1.5Mm Wall Thickness In The Horizontal Structure; Powder Painting Finish (Polyester - Epoxy), With Metal Components Having Treatment Through Nanoceramic Spray Type Bath, To Provide Greater Protection Against Corrosion And Excellent Paint Anchorage. Minimum Dimensions: Total Stringer Height: 865Mm, Stringer Depth, Extension Backrest Vertical: 380 Mm, Backrest Width: 465 Mm, Seat Height To Floor: 470 Mm. (The Stringers Quoted Must Have A Technical Report Issued By An Ergonomist, Occupational Physician Or Occupational Safety Engineer, In Accordance With Regulation No. 17; 6 (Six) Year Warranty Against Manufacturing Defects In The Metal Structure, Issued By The Manufacturer)., Stringer 03 Seats, Executive Swivel Armchair With Adjustable Armrests Multilaminated Plywood Seat 14 Mm Thick; Anatomically Injected Foam With 50 Mm Average Thickness And Density Of 50 Kg/M³; Seat Fairing Injected In Copolyme Polypropylene
|