Unijet Hydrometer For Cold Water With Magnetic Transmission, Nominal Flow Of 0.75M³/H, Maximum Flow Of 1.5M³/H, Nominal Diameter Of 3/4, Dry Watchmaking, Adjustable With Rotation Up To 360º And Tilted At 45º, Direct Reading, Housing In Metallic Alloy With At Least 60% Copper, Without Connections, Meeting The Specifications Of Metrological Class B, Dome In Polycarbonate, Length Of 115Mm For Installation With Long And Short Ends, In Accordance With Standards Nbr Nm 212/99 And Nbr 81944 Da Abnt E Ordinance 246 Of 10/17/00 From Inmetro. Idh Of At Least 93% At Minimum Flow After 100 Hours Of Bench Testing. Samae May, At Its Discretion, Define A Lot Or Part Thereof For Examinations And Tests In An Authority Or Public Body Of Its Choice To Verify The Properties Listed Above. If The Tests Fail, All Inspection, Travel And Other Costs Will Be Borne By The Winning Supplier. Minimum Warranty Of One Year, Minimum Reading Accuracy Of 3 Years And Minimum Useful Life Of 3 Years., 1/2 Multijet Hydrometer (Nominal Diameter); Direct Magnetic Transmission And Extra-Dry Watchmaking; Maximum Flow 3.0 M3/H; Nominal Flow 1.5 M3/H; Metrological Class B; Copper Alloy Housing With Threaded Ends According To Nbr 8133; Electrostatic Epoxy Resin Painting; Internal Mechanisms Made With Engineering Plastics, With Rectified Stainless Steel Shafts And Synthetic Sapphire Bearings; Watchmaking Tilted At 45 Degrees With Free Rotation Or 360 Degrees; Length 165 Mm; Accompanied By Metal Connections, Multijet Hydrometer Dn 1 (Nominal Diameter); Comp. 260Mm, Class B, Direct Magnetic Transmission And Extra-Dry Watchmaking; Qnominal 3, Maximum Flow 7.0 M3/H; Copper Alloy Housing With Threaded Ends According To Nbr 8133; Electrostatic Epoxy Resin Painting; Internal Mechanisms Made With Engineering Plastics, With Rectified Stainless Steel Shafts And Synthetic Sapphire Bearings; Watchmaking Tilted At 45 Degrees With Free Rotation Or 360 Degrees; Accompanied By Metal Connections., Woltman Hydrometer With Class B Horizontal Turbine, (Dn 50) (Brown Tube) With Flanges, Which Meets Qmax Of 50M³/H, Prepared For Remote Reading Reed-Switch With Connections (Flanges, Screws, Nuts And Seal Rings), Woltmann Hydrometer With Class B Horizontal Turbine, 150Mm (Dn-6”) With Flanges, Which Meets Qmax Of 300M³/H Prepared For Remote Reading By Reed-Switch With Connections (Flanges, Nuts And Seal Rings ), 85Mm (Dn-75) (Brown Tube) With Flanges, Which Meets Qmax Of 120M³/H Prepared For Remote Reading By Reed-Switch. With Connections (Flanges, Reel Type Electromagnetic Flow Meter (Sensor Tube And Signal Converter, With 30M Cable), No Need For Straight Section, Dn150 Pn 10 Nbr 7675 (Fluid = Drinking Water), Dn300 Pn 10 Nbr 7675 (Fluid = Drinking Water), Mag. Unijet Hydrometer, Dn ¾, Length 115Mm, Qn 0, 75M³/H, Qmax. 1, 5M³/H, Qmin. 0, 015M³/H, Class B, Dry Clockwork Orientable Up To 360° And Tilted At 45°Direct Reading, Housing In Metallic Alloy With At Minimum 60% Copper, Without Connections. Housing Painted By Electrostatic Process With Epoxy-Polyester Paint In Blue Color, With Filter Integrated At The Meter Inlet, Sieve Type, According To Standard Abnt 8194 And Ordinance 246 Of 17/10/00 Of Inmetro, Long Unijet Type Magnetic Hydrometer (165Mm), Metal Alloy Housing With At Least 60% Copper, Clockwork At 45º (Inclined), Direct Reading, National Manufacture, Service Pressure Of 1Mpa , Metrological Class “B”, Flow Class Y,
|