Tenders Are Invited For Implementation Of The Smr Of A Site: Reconstruction Of An Internal Water Supply Line ...
Tender Notice
TenderID
78770872
Tender Brief
Tenders Are Invited For Implementation Of The Smr Of A Site: Reconstruction Of An Internal Water Supply Line (Vvm) In The Village Of Oreshene, Commune. Yablanitsa Main Branch I And Push Pipeline
The Activities Included In The Scope Of The Object: Reconstruction Of The Internal Water Supply Line (Vvm) In The Village Of Oreshene, Commune. Yablanitsa Main Branch I And Push Pipeline, Are As Follows: The Main Water Supply Branch I Is Planned To Be Completed With Polyethylene Pipes Of High Density Pe Hd And Characteristics: Third Generation Polyethylene Pe 100 (Mrs 10 Mpa) And Sdr 17 (Pn 10 Bar). The Connection Of The Pipes Will Be By Butt Welding. Due To The Small Sizing Water Quantities, The Diameters Of The Secondary Branches Are Adopted Constructively - The Smallest Normatively Determined Diameters, I.E. Pipes Pe Hd D90 Mm. The Depth Of Laying The Water Pipes Is In Accordance With The Existing Wires And Facilities And Is In Accordance With Ordinance No. 8 For The Placement Of Technical Wires In Populated Areas. The Slope Of The Water Pipe Is In Accordance With The Maximum Permissible. The Depth Of The Trench Is 10 Cm Below The Design Depth Of The Water Pipe The Route Of The Main Water Supply Branch Crosses The Ravine Passing Through The Village In Two Places. The Crossing Of The Water Main Through The Gully In The Section From Ot 43 To 44 Will Be Carried Out Aerially, With The Water Main Installed In A Steel Jacket Suspended On Cantilever Over The Existing Bridge Abutments. The Passage Of The Water Pipe In The Area Of The Center Will Be Under The Bottom Of The Gully Also In A Steel Jacket Laid By Horizontal Installation. It Is Planned To Perform Thermal Insulation Of The Pipes In The Sections Where It Is Laid In A Jacket. Before Passing Through The Gully, It Is Planned To Install An Emptyer In The Center Of The Water Pipe - A High Drain That Empties Into The Gully. For All Land Regulated Properties Adjacent To The Route Of The Main Water Supply Branch I, It Is Planned To Carry Out Reconstruction Of The Building Water Supply Diversions (Svo), Including: Water Catch Clamp, Pavement Shut-Off Valve, And Pipe Sections To The Existing Water Meter And Fitting Units. Building Water Diversions Will Be Filled With High Density Polyethylene (Pe Hd) Pipes. The Pavement Stopcock Will Be Installed In The Pavement 0.50 M From The Outer Edge Of The Curb. The Building Wiring Deviations Are Planned To Be To The Building Water Metering Node In The Building, If The Building Is On The Street Regulation Or At A Distance Of Up To 5.00 M From The Street Regulation. At A Greater Distance, The Building Water Diversion Will Be Built At 2.00 M In The Property Where The Building Water Metering Unit Is To Be Installed. The Building Water Meter Will Be Installed In A Water Meter Shaft, The Construction Of Which Is The Responsibility Of The Respective Property Owner. The Push Water Line Is Also Planned To Be Completed With High Density Polyethylene Pipes Pe Hd And Characteristics: Third Generation Polyethylene Pe 100 (Mrs 10 Mpa) And Sdr 17 (Pn 10 Bar). The Connection Of The Pipes Will Be By Butt Welding The Purpose Of This Public Procurement Is To Select An Independent Contractor With Professional Qualifications, Practical Experience And Expertise In The Field Of Civil Engineering, With A View To Achieving High-Quality And Timely Implementation Of The Activities.
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 78770872
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.