Work Sign (For Civil Construction) In Galvanized Sheet N. 22, Adhesive, 2.4 . Af_05/2020_Pa, Steel Ca-50, 10, 0 Mm, Rebar, Steel Ca-60, 4, 2 Mm, Or 5, Or 6, Or 7, Block Frame, Baldrame Beam Or Footing Using Steel Ca-50 Of 10 Mm – Assembly. Af_06/2017, Baldrame Beam Or Shoe Using 8 Mm Ca-50 Steel – Assembly. Af_06/2017, Baldrame Beam And Footing Using 5 Mm Ca-60 Steel – Assembly. Af_06/2017, 8, Concreting Of Crowning Blocks And Baldrames Beams, Fck 30 Mpa, Using A Pump – Laying, Thinning And Finishing. Af_06/2017, Manual Excavation For Crowning Block Or Footing (Without Excavation For Placing Formwork). Af_06/2017, Manual Excavation Of Trench For Girder Baldrame (Including Excavation For Placing Formwork). Af_06/2017, Manufacture, Assembly And Disassembly Of Formwork For Baldrame Beam, Made Of Resin Plywood Sheet, E17 Mm, 4 Uses. Af_06/2017, Baldrame Beam Or Shoe Using 8 Mm Ca-50 Steel - Assembly. Af_06/2017, Baldrame Beam And Footing Using 5 Mm Ca-60 Steel - Assembly. Af_06/2017, Steel Ca-50 8, Rebar, Surface Waterproofing With Asphalt Emulsion, 2 Coats Af_06/2018, Mortar Mix 1:3 (In Volume Of Cement And Medium Wet Sand) For Subfloor, Mechanical Preparation With 600 L Concrete Mixer. Af_08/2019, Slim Concrete Ballast, Applied To Floors, Slabs On Ground Or Radiators, 3 Cm Thick. Af_07/2016, (Representative Composition) Of Subfloor Service In Mortar Mix 1:4 (Cim And Sand), Concrete Mixer 400 L, And 4 Cm Dry And Wet Areas On Slab, And 3 Cm Wet Areas On Waterproofing, House And Public Building Standard. Af_11/2014, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10.0 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.2Mm Or 5Mm Ca-60 Steel, Bent And Cut, Assembly And Disassembly Of Beam Formwork, Shoring With Wooden Fork, Double Right Foot , In Plasticized Wood Sheet, 18 Uses. Af_09/2020, Concreting Beams And Slabs, Fck25 Mpa, For Any Type Of Slab With Buckets In Multi-Storey Buildings Up To 4 Floors - Laying, Thickening And Finishing. Af_02/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, Sealing Masonry Of Vertically Drilled Ceramic Blocks Of 14X19x39 Cm (Thickness 14 Cm) And Laying Mortar Prepared In A Concrete Mixer. Af_12/2021, Chapisco Applied To Masonry (With The Presence Of Gaps) And Concrete Facade Structures, Using A Trowel. Mortar Mix 1:3 Prepared In A 400L Concrete Mixer. Af_10/2022, Plaster Or Single Putty In 1:2:8 Mortar Mix, Manual Preparation, Manually Applied To Facade Panels With Gaps, 25 Mm Thick, Access Via Scaffolding. Af_08/2022, (Representative Composition) Of The Plastering/Single Putty Service, Applied Manually, 1:2:8, In A 400L Concrete Mixer, Internal Walls, With Execution Of Screeds, Single-Family Residential Buildings (Houses) And Standard Public Buildings. Af_12/2014, Single Putty, For Receiving Paint, In Mortar Mix 1:2:8, Manually Applied On Internal Faces Of Walls, 10Mm Thick, Using Slices. Af_06/2014, Surface Waterproofing With Polymeric Mortar / Acrylic Membrane, 3 Coats. Af_06/2018,
|