White Nylon Clamp 500X7, 6Mm, Adapter For Top Of Metal Pole Intended For Installation Of Led Public Lights. In Galvanized Steel, For Installing 3 Luminaires, Y Shape For Fitting On 60Mm Pole, Output Tubes Of 48Mm In Diameter And 300Mm In Length, With Hole In The Lower Part Of The Tubes For Wire Exit In Case Of Aerial Installation, Porcelain Adapter E-27 To E-40, Porcelain Adapter E-40 To E-27, Pre-Formed Handle For Attaching 2X10mm2 (D10) Multiplexed Cable To The Pulley Insulator - Rge Standard, 03/27/2024, Pre-Formed Handle For Attachment Of 3X10mm2 Multiplexed Cable On Pulley Insulator., Secondary Frame Of 1 Stirrup With 3/16 Galvanized Iron Sheet With Rod And Counter-Pin And Porcelain Pulley Insulator 1 Bed., Three-Phase Multiplex Electrical Cable 4X16, 2X10mm2 Multiplexed Cable With Aluminum Conductor Insulated 0.6/1Kv For Phase Conductor Which Is Helically Arranged Around A Bare Aluminum Conductor Which Serves As Support Cable., Multipolar Cable 3X2.5Mm2 1Kv, Multipolar Cable 3X6mm2 1Kv, Multipolar Cable 4X6mm2 1Kv, Telephone Cable External Fe-100, Channel 20 X 10 X 2000 Mm - White System Ml, Gray Pvc Conduit With 5 Outputs And Two 3/4 Adapters. Supplied With Blind Cover And Two Screws And 6Mm Bushing, Universal Parallel Aluminum Connector With 01 Screw, Rge/Ceee Standard, With Screw, Nut And Steel Washer, Hot-Dip Galvanized, Packed In Individual Sealed Packaging, With Anti-Oxidant Compound, Sindal Porcelain Connector 3 Poles 10 Mmm, Sindal Porcelain Connector 3 Poles 6 Mm, Insulated Piercing Derivation Connector: Main 10-95Mm2, Derivation 1.5 - 10Mm2 By Perforating Insulator In Low Voltage Aerial Networks And Branches Up To 1,000V, For Insulated Aluminum And/Or Pvc Conductors (750V). Insulations Without Cover. The Brand Provided Must Be Approved By Rge/Cpfl. (Currently The Approved Brands Are Incesa, Inteli And Kru), System New Standard Model Socket 2 Pins + Earth (2P+T)., Double Socket 10A Or 20A (Choose Model Upon Purchase); New Standard Model Socket 2 Pins + Earth (2P+T)., Single Socket 10A Or 20A (Choose Model Upon Purchase); New Standard Model Socket 2 Pins + Earth (2P+T)., Voltage Detector - Voltage Indicator With Light And Audible Signal, Must Be Capable Of Identifying Ac Voltage Without Contact. Must Comply With Category Iv 1000V, 220V Single-Pole Circuit Breaker From 10 To 25A - As Requested, Three-Pole Circuit Breaker From 20 To 50A - 380V, Surge Protection Device - Dps Monop - Cp 74130/002Monopolar Surge Protection Device - Dps Type Ii - 275V - 40Ka - Own Composition 74130/002, Flexible Pvc Conduit 1, Flexible Wire 1.5 Mm2 450/750 V Abnt Standard, Flexible Wire 10 Mm² 1Kv, Sintenax Or Equivalent, Anti-Flame Flexible Wire 4.0 Mm 450 /750 V Abnt Standard, Flexible Anti-Flame Wire 6, Double-Sided Silicone Tape Thick 12 Mm Minimum 30.9 N/Cm, Minimum Thickness 0.18 Mm, Minimum Insulation 750 V, Minimum Elongation 175%, Adhesion To Iron/Steel Minimum 2.6 N/Cm. (Reference - Scotch 33+ From 3M, Insulating Tape Tigre Professional,
|