Weldable Pvc Adapter 25Mm X 3/4¿. Nbr-5648. Note: The Nbr, The Measurement And The Manufacturers Brand Must Appear On The Body Of The Product Written In High Relief., Weldable Pvc Adapter 50Mm X 1.1/2¿. Nbr-5648. Note: Nbr, 60Mm X 2¿ Weldable Pvc Adapter. Nbr-5648. Note: Nbr, Plastic Adhesive, 75G Tube, Chemical Composition Based On Mixtures Of Formaldehydes, Ketones And Colorless Pvc Resin, Minimum Validity Of 12 Months. Note: Packaging Containing The Product, Must Be Made Of Plastic., Weldable Pvc Reduction Bushing 25 X 20Mm Nbr-5648. Note: The Nbr, The Measurement And The Manufacturers Brand Must Appear On The Body Of The Product Written In High Relief, Galvanized Reduction Bushing, 4¿ With The Following Standard Abnt Nbr 5648:2010. Note: The Material Must Contain The Manufacturers Mark And The Nbr Expressed In High Relief., Pvc Pba Pb Je Dn50 X De60mm Manufacturers Mark And Nbr Expressed On The Product., Galvanized 90º 4¿ Curve, With Male And Female Thread, ¾ Water Meter Protection Box. With Lid And Internal Bracket Case Body Material: Internal Dimension: 356± 0.5 , 5 Mm Wall Thickness: 4.0 Mm (Uniform), Polypropylene (Pp) With Talc And Uv (Ultraviolet) Filler For Protection Against Natural Weathering And Resistance To Impact And Shock. Composite Color: Light Gray Monoblock Type Box With 03 Ribs On Each Side Face And 04 Ribs On The Top And Bottom Face For Assembly On Masonry, Using These Ribs As Clamp That Help In Fixing To The Masonry With Mortar And Prevent Distortions During The Manufacturing Process . Application For Single-Jet And Multi-Jet Hydrometers With 45º Dn-3/4 Inclined Clockwork. It Has 02 Metal Inserts In Brass Alloy, Dn-G-1/2¿¿, Mounted One On Each Side For Connecting The Hydrometer Tube And The ½¿¿ Box Outlet Pipe. Thread According To Standard Nbr-Nm-Iso 7-1 (Formerly Nbr-6414). Lid Fitting System On The Box, On The Top And With Housing For Screw Locking On The Bottom, With The Aim Of Preventing Fraud And Vandalism. Bottom And Top Passage Of The Pipe Pvc Sleeve For The Pead Dn-20 Mm Pipe At Two Points (Right And Left) With Dimensions Of Ø 51± 0.2 Mm Supplied With 03 Plugs Ø 51± 0.2 Mm In Pp For Protection Of The Holes, During Assembly In Masonry, Avoiding The Introduction Of Mortar Inside The Box. It Has 01 Support Made Of Pp With Two Rectangular Slots For Passing The Flexible Clamp And Also For Supporting The Entire Measuring Structure. It Has A Metal Screw Receiver And A Steel Seal, Allowing Perfect Assembly Of The Lid/Box Seal, Preventing Fraud. It Has A Manufacturing Date Marking To Verify Traceability. 3-Year Warranty Against Manufacturing Defects And Raw Material Defects. Assembly: Masonry Wall, Wall With Setbacks, Residences With Railings With Place For Installation And Condominiums Without Walls. Materi Cover, ¾ Water Meter Protection Box. Rectangular Underground House With Cover And Internal Grid. Box Dimensions: 250Mm (Width) X 510 Mm (Length) X 186 Mm (Height). Weight: 2, 770 Kg. Black Color, With Hole For Inserting A Seal, Preventing Its Contents From Being Handled By An Unauthorized Person. Made Of Polypropylene (Pp) Copolymer With: Aditi
|