Industrial Machinery – Anode Production Equipment. As A Result Of This Public Procurement Procedure, Ak Wishes To Purchase 1 Piece Of New, Precision, Automated, Advanced Sensor Equipment With Advanced Communication Capabilities (Equipment). The Device Is New, If All Its Components Are Put Into Operation For The First Time: It Has Not Been Deployed/Put Into Operation Before Either In Hungary Or Abroad, Nor Has It Been Used As A Demonstration Or Test Device. The Device Is An Automated Production Device, Which Simultaneously Handles The Transmission (Rolling Up And Unwinding) Of A Thin Copper Strip, Its Movement Inside The Device, Its Immersion In Washing And Electrolyzing Tubs, And The Flow Of Acidic And Alkaline Liquids In The Tubs, As Well As Its Professional Handling ( More) 100 The Introduction Of Currents Of The Order Of Magnitude, And The Professional Treatment Of The Resulting Gases And Products. Fully Automated Operation Is Expected, Which Covers Both Belt Movement, Electrolysis And Electrolyte Circulation. The Dimensions Of The Area Available For Installation (4400 X 1200 X 2700 Mm, Soil Load Max. 500 Kg/M2) Are Given By The Utility Connection Points, And It Is Expected That The Device Has A Modular Structure And A Module Size That Can Be Transported With A Forklift. An Offer Can Be Made With A Device That Complies With These Physical Limitations, And The Offer - And In The Case Of A Winner, The Performance - Must Include - In The Given Case - All Additional On-Site Equipment Required For Installation Or Carrying Out Transformation Work As Well. Main Parameters: • With Regard To The Copper Foil, O The Moving Mechanism Must Be Sized For The Professional Movement Of Foil With A Thickness Between 14-20 Micrometers. O The Width Of The Film To Be Treated Is At Least 220 Mm, At Most 300 Mm. O The Maximum Weight Of The Copper Foil Roll That Can Be Placed On The Device, Forming A Production Unit, Is 100 Kg In The Case Of A 1 Km Long Roll, After Separation. O The Maximum Winding Coil Diameter After Electroplating: Dmax=400 Mm The Device Must Be Sized For This. O The Required Precise Movement Speed Must Be Ensured In The Range Of At Least 0.1-50 Mm/S. • Regarding The Washing, Cleaning And Electrolyzing Tubs: O The Tubs Should Be Thermally Insulated (Maximum Operating Temperature 50 °C, Which Must Be Taken Into Account When Choosing Materials, But 100+ °C May Also Occur In The Event Of Malfunctions Or Undesirable Chemical Reactions). O When Sizing, Take Into Account The Operating Temperature Of 50 °C And The Boiling Point Temperature In The Event Of A Malfunction, A Duration Of At Least 8 Hours And The Hydrostatic Pressure Of The Electrolyte, Washing And Cleaning Fluids. O The Vats Must Be Prepared For A Highly Corrosive Environment, At Least In The Ph Range Of 2-12 O The Success Of The Copper Foil Separation Depends To A Large Extent On The Way The Electrolyte In The Vats Is Flowed. In The Electrolyzing Bath, An Electrolyte Current Extinguishing System Must Be Designed That: O Is A Closed System, O Does Not Have High Heat Loss (Thermally Insulated), O Has A Buffer Circuit In Order To Replace The Metal Ions, O The Buffer Circuit Is The E
|