Mobile Electric Secretion Aspirator 6 To 10 Liter - Must Be Mounted On A Pedestal With 3-Inch Casters, With Brake, Robustness Suitable For Professional Hospital Use, Must Allow Viewing And Adjustment By The Operator Without The Need For The Operator To Bend Over; It Must Have A Carrying Handle For Easy Movement Of The Device; Must Have Motor Protection Box In Resistant Plastic Material, 1/4 Hp Motor Internal Ventilation System, Allows Continuous/Intermittent Use With Indication On The Control Panel, When In Intermittent Use, Activation Must Be By Electric Pedal, Must Follow Pedal; Operation Through Diaphragm, Without Friction Surfaces, Oil-Free; It Must Have A Maximum Noise Of 60 Dba, It Must Have A Micro Filter On The Air Outlet Up To 0.5 Microns, To Prevent The Spread Of Bacteria Into The Environment Where The Equipment Is Used, It Must Have A Hydrophobic Filter Located Before The Compressor Inlet; It Must Have A Vacuum Gauge And A Fine-Pitch, High-Resistance Stainless Steel Needle Register For Vacuum Adjustment; Maximum Vacuum: 21 In.Hg; Control Panel With Digital Indicator For Operation, Operation Mode, Sound Inhibit And Wait For Reset; Must Have Support For Two Cannulas (Cannulas Included); It Must Have Two Collection Bottles With A Capacity Of 3,000 Ml Each, And Must Be Made Of Highly Impact-Resistant And Autoclavable Plastic, With High-Relief Graduations; Highly Durable Bottle Lid, Must Be Made Of Silicone; It Must Have An Audiovisual Alarm With Automatic Shutdown If The Bottle Is Filled; It Must Be Equipped With A Safety System That Does Not Allow Resetting While The Bottle Is Full; It Must Have A Redundant System That Stops Aspiration If The Bottle Is Full; Keys For Alarm Silence, Vacuum Reset And Operation Mode Selection; Power Supply, Vacuum Cleaner For Ducted Network - Vacuum Gauge - Bottle With Vacuum Suction Valve (Vacuometer). Injected Nylon Cover, Pressure Gauge From 0 To 30 Hg, Suction Flow Control Button, Suction Nozzle And Safety Float. 500 Ml Collection Bottle (Diameter Of The Collection Bottle Mouth Equal To The Internal Diameter), In Polycarbonate, Abnt Standard Connection To A Channeled Vacuum Network. Note: Compatible With Disinfection Process In Thermodisinfector Up To 93°C., Autoclave With Barrier – Horizontal Equipment, With Microprocessed Control System, Internal Chamber Capacity Of At Least 300L. It Must Operate Using Saturated Steam And Have A Structure Made Of Anti-Corrosive Material. Programmable Microprocessor Control With At Least 9 Programs, With Touch Screen, Manometer And Vacuum Gauge To Monitor The Pressure In The Chambers. External And Internal Chambers Made Of Aisi 316-L Stainless Steel With Thermal Insulation, The Internal Chamber Must Have A Drain And A Validation Input, Allowing The Introduction Of Sensors To Collect Process Temperature Data. It Must Have Two Doors, A Sanitary Barrier And An Emergency System. Closing Of Doors Carried Out By Means Of Vertical Lifting / Guillotine With Anti-Pinch Safety System. Hydraulic System With Pipes And Connections Of The Hydraulic Assembly Must Be Made Of Anticorrosive And Resistant Material. Sterilization Chamber And Steam Generator Connections Must Be Made Of Stainless Steel Or Other Compatible Material. Have A Vacuum Pump And Centrifugal Water Pump With Sufficient Capacity For The Steam Generator. Security System That Should Make Fun Impossible
|