Diagonal Cutting Pliers, 6, For Cutting Wires, Wires And Copper, Bronze, Aluminum, Brass, Plastic, Common And Tempered Steel Materials, With A Maximum Diameter Of 2Mm, Insulated Cable For Working On Energized Lines, Using Cable Pliers Insulated For 1000 V, In Accordance With Standard Nbr 9699. Must Have Automatic Opening., Professional Pliers 8, With Insulated Cable In Accordance With Standard Abnt Nbr 9699: Insulation In Work With Voltage Up To 1000 V, Rounded Protective Tabs, Have A Device For Pressing Gauge Terminals Up To 10 Mm², Must Have Automatic Opening., 12” Water Pump Pliers. With 6 Opening Settings And Electrical Isolation Of 1000V And Capacity Of 60Mm. Produced For The Purpose Of Fixing, Holding, Twisting And Tightening Parts And Pipes. Produced In Chrome Vanadium Steel, Providing Greater Strength And Durability, Pressure Pliers, With A Total Measurement Of 10”. Made From Chrome Vanadium Steel. Used To Hold Firmly, Fix Parts, Fasten And Lock, Loosen Damaged Screws, Cut Metal Pipes, Hexagonal Allen Wrench Set. Made From Chrome Vanadium Steel. Containing 1.5Mm, 2.0Mm, 2.5Mm, 3.0Mm, 4.0Mm, 5.0Mm, 6.0Mm, 8.0Mm And 10Mm Wrench. For The Purpose, The Allen Wrench Is A Manual Tool Used To Tighten And Loosen Screws With An Internal Hexagonal Socket, A Set Of 1/2 Inch Splined Sockets, Made Of Chrome Vanadium Steel. Composed Of 22 Pieces, Including: 01 5 Extension, 01 10” Extension, 01 ½” Reversible Ratchet, 01 10” T Handle And 18 Splined Sockets 8, 9, 10, 11, 12, 13, 14, 15, 16 , 17, 18, 19, 21, 22, 24, 27, 30, 32 Mm, Speedy Combination Wrench Set With Ratchet 8 To 19Mm. Made From Chrome-Vanadium Steel. Used To Tighten And Loosen Screws And Nuts Of Different Types, Turquoise Torque Wrench Type 12 Inches With 300Mm. Toques Armador Is Suitable For Pulling Out Nails And Cutting Wires, A Set Of Long Drill Bits Measuring 6Mm, 8Mm, 10Mm And 12Mm X 300Mm. Carbide Tip. Ideal For Concrete And Wall, Long Drill Bit Set For Wood, Plastic And Aluminum. With 6Mm (1/4) Drill - Length: 25 Cm, 8Mm (5/16) - Length: 28Cm And 10Mm (3/8) - Length: 32Cm, Set Of Drills Made Of High-Speed Steel With Glossy Finish, For Applications In Machining Steel With Hardness Up To 45 Hrc. Containing 1, 0 - 1, 5 - 2, 0 - 2, 5 - 3, 0 - 3, 5 - 4, 0 - 4, 5 - 5, 0 - 5, 5 - 6, 0 - 6, 5 - 7 , 0 - 7, 5 - 8, 0 - 8, 5 - 9, 0 - 9, 5 - 10, 0 - 10, 5 - 11, 0 - 11, 5 - 12, 0 - 12, 5 - 13, 0Mm , Drill Game For Video. Suitable For Application To Concrete/Masonry. Containing Drills With Diameters Of 5, 8 And 10Mm, Length Of 70, 85, 100 And 110Mm And Useful Length Of 35, 45 And 60Mm. Made Of Hard Metal, Wood Drill Set With A Diameter Of Ø3/4/5/6/7/8/10Mm With A Three-Point Head. Recommended For Use In Screwdrivers And Drills, Stepped Drill Kits With Titanium. With 3 Specifications Cutters: Item 01: 4-12Mm: 4 Mm, 6 Mm, 8 Mm, 10 Mm, 12 Mm. Item 02: 4-20Mm: 4Mm, 12Mm, 14Mm, 16Mm, 18Mm, 20Mm. Item 03: 3-12Mm: 3 Mm, 4 Mm, 5 Mm, 7 Mm, 9 Mm, 11 Mm, Screwdriver Set, Made With Tempered Chrome Vanadium Steel With Chrome Finish. With Phosphated And Magnetized Tip. Composed Of Keys Of 3 X 75 Mm (1/8” 4” X 6) – 8 X 150 Mm (5/16” Composed Of 5 Phillips Screwdrivers Containing A 1/4 X 1.1/2 Phillips Screwdriver; 1/4X4; 1/4 X 6; 3/16 X 1.1/2 And 3/16 X
|