Robotic Kit Based On A Microcontroller. The Composition Of The Set Should Include, At Least: Usb Cable - 1 Pc., Lcd Display - 1 Pc., Flexible Conductors - 1 Pc., Sufficient To Ensure The Declared Functionality Of All Other Parts Of The Set For Stem Experiments, Analog Temperature Sensor - 1 Pc., Ir Remote Control With At Least 10 Buttons, Diode – 10 Pcs., Crown Terminal – 1 Pc., Two-Coordinate Joystick - 1 Pc., Indicator At Least 7 Segments. 4-Bit - 1 Pc., 7-Segment, Single-Digit Indicator. - 1 Pc., Button - 6 Pcs., Button Cap - Blue, Red, White, Green (In The Amount Of 3 Pcs. Of Each Color) Capacitor Not Less Than 100 Μf - 3 Pcs., Capacitor Not Less Than 1 Μf - 10 Pcs ., Shift Register - 1 Pc., Breadboard For Assembly Without Soldering - 1 Pc., Led Matrix At Least 8*8 - 1 Pc., Potentiometer At Least 10 Kω - 2 Pcs., Potentiometer At Least 100 Kω - 2 Pcs., Ir Remote Control - 1 Pc., Piezo Emitter - 1 Pc., Comb Connector For At Least 40 Outputs - 2 Pcs., Input/Output Port Expander - 1 Pc., Resistors At Least 1 Kohm, 10 Kohm, 220 Ohm, 4, 7 Kω, 47 Kω - (In The Amount Of 30 Pcs. Of Each Type), Single-Channel Relay Module For At Least 12 V - 1 Pc., Real-Time Module - 1 Pc., Leds Of Four Different Colors - Each In The Amount Of 12 Pcs., Servo Drive - 1 Pc., Transistor - 10 Pcs., Ultrasonic Sensor - 1 Pc., Photodetector - 1 Pc., Photoresistor - 1 Pc.
|