Construction Work - Construction Of A Small Photovoltaic Solar Power Plant. Bidders Duties And Quantities: Media Service Supporter And Asset Management Fund At 1037 Budapest, Kunigunda Út. 64, With Reverse Watt Protection Surface Car Parks Wants To Establish A Small Solar Power Plant With A Capacity Of 480 Kw On A Unique Support Structure Installed Above. The Planned Power Plant Will Produce Electricity For 1,400 Pcs Standard Size, Min. 400 Wp Unit Power (Trinasolar Vertex S 400 - 400Wp Or Equivalent) With A Solar Module. The Small Power Plant – On Dc/Ac Inverters, And Via Two Inverter Distributors - It Is Connected To The Internal 10/0.4 Kv Network Of The Mtva Building F Through 10/0.4 Kv Transformer Stations. The Produced Surplus Energy Is Not Fed Back Into The Public Network. The Small Power Plant Is Built Into The Inverter With Direct Intervention Protection, Protection Against Isolated Operation, Reverse-Watt Protection And Kif Circuit Breaker Will Be Equipped With Overcurrent Protection, As Well As Protection Against Contact And Electric Shock Protection And A Lightning Protection System Will Be Established. Planned Solar System Data: • Nominal Voltage Of Small Power Plant: 3X400/230 V, 50 Hz • Nominal Capacity: 480 Kw • Number And Power Of Inverters: 4 100 Kva And 2 40 Kva Inverters • Number/Power Of Solar Panels: 1,400 Pcs / 400 Wp, Σ560 Kwp • Small Power Plant Nominal Current Strength: 3X696 A At 0.4Kv Installation Of The Planned Roof Structures On The Existing Surface Parking Lot (Across From Kunigunda Ut.) Takes Place On The First Five Parking Lanes. The Roof Structures Its Longitudinal Direction Is Approximately N-S. The Roof Structure Is Between The Parking Areas Slopes Down To The Vegetation Strip, Open Above The Vegetation Strip. The Inclination Angle Of The Roofs Is 10°. The Solar Panels A Trapezoidal Shell Is Made Underneath - In Order To Seal The Water. Drainage Of Rainwater From Roofs Will Be Connected To The Existing Drainage Network. Four Roof Structures With A Span Of 12.30 M (One-Column Design), While The Western Fifth With A Span Of 14.55 M (Two-Column In Design) Is Made. The Length Of The Roof Structures (Each) Is 50.60 M. The Roof Structures Its Frames Are Heb Profile Columns Clamped Into The Base Body (Reinforced Block Slabs) And (Wedge) It Is Made Up Of Cantilever Beams With Ipe Section. 10 Frames Are Made For Each Roof Structure, 2-2 Frame Position, Lattice Support In The Plane Of The Columns, And Cross In The Plane Of The Elements With Bracing. Four A Roof Structures With A Supporting Structure Span Of 12.30 M, While The Western Fifth Marked B – To The Wider Green Area Separating The Parking Areas In View - With A Supporting Structure Span Of 14.55 M In A Two-Column Design Prepare. The Length Of The Supporting Structure Of The Roofs Is 50.60 M, The Height Of The Steel Frames Is From The Upper Level Of The Foundation - 4.60 M. The Columns Are Heb Sections Included In The Base Body, The Cantilever Beams (Undercut At The Columns) Are Formed By Ipe Sections. The Roof Structures Its Reinforcement Was Made Of Closed Sections Placed In The Plane Of The Columns - In Two Fields Lattice Supports, Pressure Bars With A Closed Section In The Plane Of The Roof And Tensioned Circular Steel Crosses Are Created. Manufacture, Placement And On-Site Of A 124 T Steel Support Structure For The Roof Structure Installation, With Anti-Corrosion Surface Treatment (Hot-Dip Galvanizing According To Msz En 1461) Necessary In The Area Of The Planned Solar Cell Roofs, The Existing Lighting Candelabra (10 Db) Will Be Dismantled, The Necessary Lighting Will Be Provided By The Roof Structure Is Provided By Light Fittings Installed Below (Led Tubes With Twilight Switch). The Parking Lot A (Parking Technology) System Indicating The Occupancy Of Spaces Will Be Built. Above, And The Other Conditions Are Partially Included In The Design Documentation. Information: Before Submitting The Offer, The Contractor Must Find Out About The Construction On Site About The Future Conditions And The Specifics Of The Work With An Insight Into The Plans, Especially With Regard To The Delivery Route, Which Is Provided By The Contracting Authority The Possibility Of A Site Visit (See Field Bt-300). The Winning Bidder Later You May Not Refer To The Tenderer On The Insufficiency Of The Documentation And These May Not Impose Subsequent Requirements By Reference. The Implementation Documentation On Paper And Digitally (1 E.G. In Printed Form, 1 E.G. In Electronic Form) You Need The Technical To Hand Over Until The Handover Procedure. • Full Completion Of The Entire Work And All Handover Of The Document Is A Prerequisite For The Technical Handover. Detailed Related To Performance Requirements Are Contained In The Public Procurement Documents And Their Technical Annexes.
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 72844504
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.
