|
Magnetic Stirrer With Heating • Made Of Injected Aluminum And Finished In Black Electrostatic Epoxy, Resistant To Corrosive Chemical Products For Greater Durability And Robustness. • Modern And Advanced Design, Valuing The Work Environment With Safety; • Heating Plate In Injected Aluminum (Unbreakable) With Armored Resistance Incorporated, With Plate Diameter Of 14Cm And Total Height Of 10Cm; • Suitable For Stirring Up To 4 Liters Of Water;*Induction Motor With Bearing And Bearing; * Linear Electronic Control Of Rotation From 100 To 1800 Rpm And Pilot L * Temperature Controlled By Capillary Thermostat From 50 To 360 Oc; * On-Off Switch (Rear); *Low Short Maintenance; * Trifilar Cable With Rubber Ground Wire In Compliance With The Iec60083 Standard (Does Not Melt When Placed Against The Heating Plate); * Power: 650W; * Frequency: 50-60Hz, * Dimension (Lxhxh): 19X22x10cm; Degree Of Protection: Ip23; It Comes With A 9X25mm Teflon-Coated Magnetic Bar, Voltage 220V, 22 Liters Digital Bain Marie With 8-Position Lid, (Stainless Steel Tub L=505Xp=300Xa=150Mm) With Stainless Steel Lid With 4/6 Or 8 Rings Reducers. Requirements: Cabinet In Steel Sheet Coated In Electrotactic Epoxy; Built In Laminated Fiberglass, With Excellent External Finishing; Capacity Of 9L In The 4-Burner Bath And 22L In The 8-Burner Bath; 304 Stainless Steel Tank Without Welding, With Rounded Corners; Voltage 220 V. Armored Tubular Resistance; Working Range Between 10°C Above Ambient Temperature Up To 110°C; Microcontrolled Temperature Controller With Double Multi Configurable Display, Auto Tuning And Pid; Sensor Type Pt 100; Constant Level; Removable Stainless Steel Lid; Stainless Steel Reduction Rings In 3 Sizes: Diameter 104 Mm, Diameter 75 Mm And Diameter 45 Mm; Power Cable With Double Insulation And Three-Pin Plug, Two Phases And One Ground, Complying With The New Abnt Nbr 14136 Standard; Supplied With Reduction Rings, Cap And Instruction Manual. Conductivity Accuracy: ± 1% On All Scales. Electrode: K = 1 Temperature Compensation Range: 0 ~ 40Oc Temperature Coefficient: 0 ~ 5%/Oc Dimensions And Box Weight: 33X27x21 (Lxwxh) Weight: 1, 400Kg. Comes With Electrode, Electrode Support, Equipment And Calibration Solution. Voltage: Bivolt, Phmeter Bench Detailed Equipment Description And Specifications: Manual/Automatic Temperature Compensation Pt100 Sensor In Stainless Steel Electrode. Automatic Calibration With Automatic Recognition Of Buffer Solutions (The Equipment Will Sound An Alarm In Case Of Attempting To Use Inappropriate Solutions). Electrode Status Graphic Indicator Allows Evaluating Electrode Operating Conditions, Graphic Display With Blue Backlighting, With Excellent Visibility. Articulated Electrode Holder With 180º Rotation And Stopped In Any Position. Ph Range: 0.00 ~ 14.00 Ph, Ph Accuracy: ±0.01 Ph, Mv Range: 0 ~± 1999 Mv, Mv Accuracy: ± 2Mv, Automatic Calibration - Recognize Buffer, Temperature Range: 0 ~ 100C, Temperature Accuracy: ± 1C , Temperature Compensation: Manual / Automatic, Temperature Compensation Range: 0 ~95 C, Electrode Connector: Graphic Indication, Dimensions: 210 X 205 X 65Mm, Weight 1.9Kg. Comes With: Ph Electrode, Temperature Electrode, Bivolt Power Supply, Buffer Solutions, Electrode Solutions, Articulated And Manual Support., Complete Reverse Osmosis Water Purification System With Pump And Uv System
|
