75D301 21 R 71744 2021 Broad Agency Announcement Development And Demonstration Of Mine Safety And Health Technology The Mine Improvement And New Emergency Response Act Of 2006 Miner Act Permanently Established The Office Of Mine Safety And Health Research Under The Direction Of An Associate Director Within The National Institute For Occupational Safety And Health One Purpose Of This Office Is To Enhance The Development Of New Technology And Technological Applications And To Expedite The Commercial Availability And Implementation Of Such Technology In Mining Environments The Miner Act Grants The Office Of Mine Safety And Health Research The Authority To 1 Award Competitive Contracts And Grants To Institutions And Private Entities To Encourage The Development And Manufacture Of Mine Safety Equipment And 2 Award Contracts To Education Institutions Or Private Laboratories For The Performance Of Product Testing Or Related Work With Respect To New Mine Technology Or Equipment This Announcement Is An Opportunity For The Award Of Contracts For Enhancing Safety In Mines The Primary Goal Of The Miner Act Technology Mandate Is To Improve Increase The Use Of Technology In Mines To Improve Mineworker Safety And Health And The Intent Of This Broad Agency Announcement Is To Support Enabling Activities Such As Technology Identification Validation Demonstration Adaptation And Or Commercialization The Office Of Mine Safety And Health Research Of Niosh Is Soliciting Concept Papers To Conduct Research Exploratory Development Testing Or Evaluations Of New Technologies To Improve Mine Safety Or To Adapt Technologies From Other Industries For Application In Mining Environments The Primary Interest Of This Broad Agency Announcement Is To Promote The Modification Or Final Development Of Practical Technologies Or Systems That Can Be Adopted By The Mining Community In A Short Period Of Time Under This Specific Solicitation Proposals To Conduct Theoretical Or Basic Research Will Not Be Considered Niosh Strongly Encourages Proposals That Include Collaboration With Mining Industry Partners Who Understand The Reality Of The Mining Environment And Can Provide Insight Into Mine Design Requirements And Potential Commercialization Of The Technology The Following Examples Are Presented To Further Illustrate Appropriate Submissions Under This Solicitation Beyond The More General Guidance Listed Previously 1 A Safety And Or Health Technology That Is Currently In A Prototype Stage Which Will Require Funding For Final Development And Adaptation To The Mining Environment This Could Include Modification Of Prototypes To Account For Operation In The Challenging Underground Coal Environment Modification To Meet Permissibility Requirements And Or Demonstration Of The Technology At Actual Mine Sites 2 A Safety And Or Health Technology That Is Currently Being Used In Another Industry And Requires Modification To Be Adapted For Mining Applications This Could Include System Redesign Modification To Meet Permissibility Requirements In Mine Testing To Establish The Efficacy Of The Technology And Or Demonstration Of The Technology At Mine Sites 3 Analysis Of Candidate Technologies To Establish Their Potential To Improve Safety And Or Health And Or Analyses Of Barriers To Technology Application Or Means Of Overcoming Such Barriers 4 A Safety And Or Health Technology That Is Fully Developed And Available For Use But Is Not Being Adopted By The Industry For Reasons That Require Further Analysis This Could Include Developing An Initial Operational Capability By Installing The Technology In One Or More Mines For Evaluation And Or Market Analysis To Determine The Reasons The Technology Is Not Being Adopted And The Changes That Would Be Necessary To Make It Acceptable To The Industry 5 Analysis Of Safety And Health Information In The Surveillance Area Or Other Work That Involves The Extraction Of Predictive Information That Could Produce Useful Data For Identifying The Future Technology Needs Of The Mining Industry Fatality And Injury Data Continue To Highlight The Need To Develop New Or Improve Existing Technologies Or Adapt Technologies From Other Industries To Address Safety And Health Issues In Surface And Underground Mines Related To The Coal Metal Non Metal And Stone Sand And Gravel Mining Sectors Niosh Has Typically Provided A Number Of Topical Areas Of Importance To Guide Responders In Addressing Its Highest Priorities This Solicitation Continues That Practice As Described Below However Niosh Encourages Responders To Propose Solutions To Other Health And Safety Issues That Are Responsive To Our Guidelines These Proposals Are Evaluated Under The Same Criteria As Submittals Under The Focus Area And Receive Equal Consideration For Funding Thirty Percent Of The Contracts Funded Under This Program Have Come From This Category Of Submittals And In Some Fiscal Years Have Made Up Fifty To Seventy Percent Of The Funded Proposals Concept Papers Will Be Accepted From The Release Of The Solicitation Through January 15 2021 Full Proposals For Concept Papers That Are Found To Be Technically Acceptable Will Be Due Within 30 Days After Notification By The Contracting Officer Work That Will Be Completed In 24 Months Or Less Is Desired But Is Not A Requirement Projects Requiring Up To 48 Months Will Be Considered Niosh Estimates That The Typical Project Under This Solicitation Will Require Between 200 000 And 300 000 Although Proposals For Amounts Up To 650 000 Will Be Considered Proposals Submitted In Excess Of The 650 000 Ceiling Will Not Be Evaluated Nor Considered For Funding It Is Estimated That About 6 To 10 Awards Will Be Made With Approximately 2M To 5M Available For This Baa Topical Area Of Importance Niosh Welcomes Proposals In The Surveillance Area Or Other Work That Involves The Extraction Of Predictive Information That Could Produce Useful Data For Identifying The Future Technology Needs Of The Mining Industry As Noted Above Niosh Also Encourages Proposals Addressing Health And Safety Issues Outside Of These Focus Areas Additional Investigations Related To The Nas Report Monitoring And Sampling Approaches To Assess Underground Coal Mine Dust Exposures In 2016 Congress Directed Niosh To Initiate A Study By The National Academy Of Sciences To Consider Monitoring Technologies And Sampling Protocols Used In The United States And In Similarly Industrialized Countries For The Control Of Respirable Coal Mine Dust Rcmd Exposure In Underground Coal Mines Effects Of Rock Dust Mixtures And Their Application On Rcmd Measurements And The Efficacy Of Current Monitoring Technologies And Sampling Approaches The Nas Published Their Report In 2018P0f 1 P In This Report The Nas Made A Series Of Recommendations Niosh Funded Four Proposals In 2019 Related To The Nas Report Recommendations Niosh Is Interested To Continue Funding Additional Proposals Related To Two Recommendations From The Report Recommendation 2 Conduct Studies To Evaluate The Exposures Of Miners Not Wearing Cpdms To Ensure That The Approach Of Detecting And Mitigating High Exposures For Designated Occupations Reliably Results In Mitigating High Exposures Of All Worker While Both The Bureau Of Mines And Niosh Have Done Work In The Past In This Area There Is Interest In A Study To Establish If Compliance Sampling Of Designated Occupations Is Representative Of Non Sampled Miner Exposures Recommendation 6 Niosh Should Incorporate Appropriate Filter Media That Is Compatible With An End Of Shift Analyzer For Respirable Crystalline Niosh Is Interested In Funding Work Related To Filter Media Compatible With The Teom Used In The Thermofisher Pdm3700 Personal Dust Monitor That Could Be Utilized With The Niosh Field Based Silica Monitoring Techniquep1f 2 P 2 Roof Bolter Automation And Operator Dust Exposure Reduction Full Roof Bolter Automation Could Potentially Serve To Remove The Operators From Musculoskeletal Disorder Msd Issues In Bolt And Mesh Handling And Eliminate Respirable Crystalline Silica Rcs Exposure When Operating Downwind Of The Continuous Miner Roof Bolting Is A Complex Process Involving The Handling Of Drill Steels Roof Bolts And Plates And Steel Mesh In Addition There Are Other Ground Control Installations Processes Completed By The Roof Bolter Operator And Machine Such As Cable Bolting And Rib Bolting However The Main Entry Roof Bolting Process Is Repetitive And Could Be Amenable To Efforts To Automate The Process To Eliminate Physical Operator Involvement Solutions To Automate This Process In Addition To Cable Bolting And Rib Bolting To Remove The Need For Physically Handling The Roof Bolting Materials Would Be Beneficial The Roof Bolter Operators Are Also Susceptible To Over Exposure To Rcs Dust Especially When Downwind Of The Continuous Miner Cm The Current Method To Reduce This Exposure Is To Regulate The Roof Bolter Operation To Only 40 Ft Of Operation Downwind Of The Miner Per Shift The Canopy Air Curtain Is Also A Viable Control To Reduce Operator Exposure To Rcs However Its Protection Has Been Shown To Be Variable Solutions To Improve The Canopy Air Curtain Protection And Or Other Solutions To Reduce Operator Exposure Downwind Of The Miner Are Encouraged 3 Development Of A Purpose Built Flame Or Detonation Arrestor For Li Ion Battery Thermal Runaway Mining Equipment Powered By Li Ion Batteries Is Being Developed For Use In Gassy Mines Li Ion Batteries Susceptible To Thermal Runaway May Produce Pressurized Explosions When Confined Within Sealed Enclosures Such As Explosion Proof Or Flame Proof Enclosuresp2f 3 P There Is A Need For Venting Of Thermal Runaway Gases To Relieve Excessive Overpressures Within The Explosion Proof Or Flame Proof Enclosure While Ensuring That Ignition Of An External Explosive Mine Atmosphere Does Not Occur Pressure Relieving Flame Arrestors For Enclosures Used In Gassy Mines Were Designed For Arresting Methane Air Or Hydrogen Air Ignitions As Opposed To Thermal Runaway Gases Solutions Are Sought To Develop Flame Or Detonation Arrestors Sufficient For Quenching Li Ion Battery Thermal Runaway Gases Released From Enclosures Along With Supporting Test Data Test Criteria And Other Information Used To Determine Sufficiency Of The Arrestor To Prevent Mine Explosions 4 Big Data Analytics And Machine Learning Techniques As Fatalities And Other Severe Incidents I E Lagging Indicators Decrease The Mining Industry Needs A More Proactive Approach To Risk Management That Focuses On Using Health And Safety H Amp S Leading Indicator Data To Help Identify Predict And Control Risks Some Examples Of Leading Indicator Data May Include Near Miss Incidents Risk Assessments Safety Audits Behavioral Observations Knowledge Assessments Workplace Exams Injuries Citations And Worker Compensation Data From Insurance Companies Or Federal Websites Other Sources Of Data May Include Data From Mine Monitoring Tracking Systems Equipment Operation Logs Etc The Objective Of This Research Is To Identify And Or Improve Quantification Of Safety And Health Risks Through The Use Big Data Analytics And Machine Learning Techniques On Large Datasets Research Questions To Be Answered May Include Topics Such As What Machine Learning Techniques Or Methods Can Be Used To Analyze Safety Big Data In The Mining Industry And What H Amp S Outcomes I E Risks Can Be Predicted Using Available H Amp S Leading Indicator Data The Goal Will Be To Develop Machine Learning Model S To Accomplish The Objective And At A Minimum Answer The Two Proposed Research Questions 5 Intrinsically Safe Devices Niosh Has Identified A Number Of Products That Have Either 1 Been Approved As Intrinsically Safe Under Iec Or Other Authorities Or 2 Had Msha Approval But As Electronic Components Become Unavailable Or Technologically Obsolete Are No Longer Available Niosh Would Like To Facilitate An Introduction Or Return Of These Products Or Similar Offerings To Market Note That Niosh Cannot Pay For The Cost Of The Approval But Only For Design And Prototype Work The Examples Below Are For Illustrative Purposes Only Intrinsically Safe Camera For The Utilization Of Helmet Cam Technology Portable Intrinsically Safe Logging Anemometer For Use In Evaluating Engineering Controls In Underground Coal Mining Permissible Ppe Alternative For Dust Exposure Utilizing A Powered Air Purifying Respirator Papr Development Of An Msha Approved Light Scattering Instantaneous Dust Monitor Similar To The Previously Available Personal Dataram Pdr 1000 Monitor Permissible Electronic Surveying Equipment Such As A Total Station Miniature Dataloggers Similar To The Campbell Scientific Model 21X The Development Of Products For Permissibility Should Also Include Technological Enhancements To Improve Performance Reduce The Size Of The Product For Better Field Adaptability And Or Decrease The Cost To Improve The Acceptance Of The Product In The Mining Industry Response Date This Announcement Will Remain Open Until January 15 2021 Concept Papers Will Be Accepted From The Release Of The Solicitation Through January 15 2021 3 00 Pm Et Local Concept Papers Submitted After The Deadline Will Not Be Accepted Full Proposals For Concept Papers That Are Found To Be Technically Acceptable Will Be Due Within 30 Days After Notification By The Contracting Officer Inquiries And Additional Information Information And Specific Questions Of A Technical Business Nature Only Will Be Accepted Via E Mail Sent To Contracting Officer Diane Meeder At The Following Address Dmeeder Cdc Gov Include Your Name And E Mail Address On The Message Responses To The E Mail Questions Will Be Handled On A First Come Basis And Generally Will Be Answered Within 10 Business Days Phone Calls Will Not Be Accepted Additional Information Will Also Available Online At The Following Address Https Www Cdc Gov Niosh Mining Researchprogram Fundingops Html 1 Https Doi Org 10 17226 25111 2 Https Www Cdc Gov Niosh Mining Researchprogram Projects Project Advancingexposuremonitoring Html 3 Dubaniewicz Th 2020 Thermal Runaway Pressures Of Iron Phosphate Li Ion Cells Within Sealed Enclosures Presentation To The Global Mining Guidelines Group Https Www Youtube Com Watch V Jdgig0qb4jg
Contact Information
Other Detail
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 35115768
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.