Tenders Are Invited For General Health And Safety Measures At Workplace Allow For The Compliance To Osha 94 ...

Work Detail

Tenders Are Invited For General Health And Safety Measures At Workplace Allow For The Compliance To Osha 94 Fma 67And Statutory Requirements As To Ensure The Safety Health And Welfare Of Persons At Work And Public Protection Arising From The Works Allow For Compliance With Indah Water Konsortium Operational Instruction Opi Requirements In Accordance With Scope Of Works Allow For Adequate Personal Protective Equipment Ppe Such As Safety Helmets Safety Boots Eye Protectors Employer s Staffs And Authorized Visitors Allow The Provision To Conduct Hazard Identification Risk Assessment And To Implement Control Measures In Accordance To The Scope Of Work Provide First Aid Facilities For Contractor s Employees And The Employer s Representative Site Staff For The Duration Of The Contract Allow For Color Photographs Minimum To Be Taken Before During And After Completion Of Works And Final Measurement To Be Submitted With Final Claim All Quantities Are Provisional And Subjected To Final Measurement Contractor Shall Repair If There Is Any Damage To The Surrounding Area During The Fixing Works The Dimension Shall Be Follow The Existing Actual Size And Shape At Site To Supply Fabricate And Install 6Mm Thickness Heavy Duty Hot Dipped Galvanised Mild Steel Chequered Plate Cover To The Scum Pit And Grit Chamber Opening C W Hot Dipped Seating Frames Hot Dipped Hinges And Hot Dipped Lifting Handles Rate Inclusive Of Removal And Return To Iwk Preparation At Site Fixing Drilling Welding Or Cutting Of Associated Works Hacking Modification Works And All Necessary Works As Instructed By Iwk s Representative For The Completion Of Works Contractor Shall Repair If There Is Any Damage To The Surrounding Area During The Fixing Works The Dimension Shall Be Follow The Existing Actual Size And Shape At Site Completely Not Allow To Cut Welding Drill Holes And Etc After The Chequered Plates Being Fully Hot Dipped M2 8 800 2 200 To Supply And Install Hot Dipped Galvanised Hinges And Hot Dipped Lifting Handles On Existing Chequered Plate Cover Rate Inclusive Of Removal And Return To Iwk Fixing Drilling Welding Or Cutting Of Associated Works Modification Works Remove Rusting Painting With One Coat Epoxy Paint To The Existing Chequered Plate Cover And All Necessary Works As Instructed By Iwk s Representative For The Completion Of Works The Hinge Size Shall Be Follow The Existing No 1 000 3 000 Grating 0 000 3 100 To Supply Fabricate And Install 6Mm Thickness Heavy Duty Hot Dipped Galvanised Mid Steel Grating C W Hot Dipped Seating Frames Hot Dipped Angles Hot Dipped Flats And Hot Dipped Hinges The Spacing Between The Each Infill Bearing Bar Grating Shall Be 28 30Mm C C And 25Mm Depth Rate Inclusive Of Removal And Return To Iwk Preparation At Site Fixing Drilling Welding Or Cutting Of Associated Works Hacking Modification Works And All Necessary Works As Instructed By Iwk s Representative For The Completion Of Works Contractor Shall Repair If There Is Any Damage To The Surrounding Area During The Fixing Works The Dimension Shall Be Follow The Existing Actual Size And Shape At Site Completely Not Allow To Cut Welding Drill Holes And Etc After The Gratings Being Fully Hot Dipped M2 67 000 3 200 Painting To The Existing Gratings Hinges And Seating Frame To Supply Labour Machineries Tools And Material To Prepare And Apply With One Coat Red Oxide And Two Coat Epoxy Paint As Instructed By Iwk s Representative Prior To Each New Layer Of Coating The Surface Shall Be Inspected By Iwk Representative Rate To Include Preparation Work Such As Remove Clearly The Existing Rusting On The Grating With Machineries To Ensure The Surface To Be Painted Should Be Dry And Clean From Rusting Free From Contamination And Dirt Contractor Shall Repair If There Is Any Damage To The Surrounding Area M2 95 000 4 000 Cable Trunking 0 000 4 100 To Supply Deliver Provide Machineries And Tools To Replace New Hot Dip Galvanised Cable Trunking With Cover C W S S Supports S S Bolt S S Nuts S S Brackets And Including Of All Related Accessories To Complete The Work Rate To Include Dismantle Existing Fixing Drilling Welding Or Cutting Of Associated Works And Modification If Necessary Spec Material Hot Dip Galvanised The Trunking Size W 100Mm X D 50Mm

Contact Information

Other Detail