Tenders are invited for Refurbishment of the UNMAS Workshop

Work Detail

Tenders are invited for Refurbishment of the UNMAS Workshop at Tomping Camp Juba South SudanDeadline 26 May 2021 09 00 0 001 3 Description of the projectThe project consists of the renovation of the UNMAS Workshop compound The main aspects to be considered are summarized in the following points 1 3 1 Workshop areaThe project includes the renovation and expansion of the existing Workshop area The workshop is a container based structure consisting in 2x40ft and 2x20ft sea container ISO standard There is a concrete slab floor 10cm thick and a metal structure roof covering the central area The roof structure has 6 trusses and 10 rafters 100x50mm steel profiles covered by GI sheets The works entail the Relocation of container C 24 aligned with container C 01 The UNMISS Engineering section will take care of the operation for moving the containers Extension of floor slab by 6000x7700x100mm with a concrete C20 25 reinforced with 8 each 200mm in both axes Extension of the roof structure using profiles 80x40mm and GI sheets 28G provided by UNMAS to replicate the same structure The metal pillars are 100x100mm pillars 5mm thick anchored to the 500x750x750mm RC foundations and containers with metal flat anchoring plates in stainless steel 250x250mmx10mm welded continuously TIG3mm to the pillar including reinforcement angles 70 70mm 8m thick and 4x anchoring bolts 12 L 500mm with nuts Installation of 2x 220HEB beams between the pillars to support the trusses in the South corner Painting with one coat of pre approved metal outdoor white oil based paint over two coats of appropriate anti rust primer for the out door walls and roof of the containers Closing the gap between the containers and the ground level with of hollow bricks 200x200x400mm for C25 1 1 2 to 250kg cm2 mortar joints of 1 3 10mm thick and plastering Repairing the floor of the Workshop office including removing the existing carpet and replacing it by a new one of similar characteristics Sealing the joints between the windows and the container frame in the Workshop office using neutral silicone Creating a partition wall in the Changing room consisting of a timber structure and varnish plywood panels 1 3 2 Office areaThe project includes the renovation and expansion of the existing Offices area The Offices area is a container based structure consisting in 9x20ft in the first floor metal stairs and 6x20ft in the second level creating an open space There is a concrete slab floor 10cm thick and a metal structure roof covering the central area The roof structure has 5 trusses and 12 rafters 40x40mm steel profiles covered by GI sheets The works entail the Extension of the roof structure using profiles 80x40mm rafters and GI sheets provided by UNMAS to cover the three containers using a single slope The metal pillars are 100x100mm and the beam HEB100 anchored to the containers with metal flat plates in stainless steel 100x100mmx5mm welded continuously TIG3mm Painting with two coats of preapproved metal outdoor white oil based paint over two coats of appropriate primer for the out door walls and roof of the containers Dressing the container C 16 with the installation of 1200x2000x06mm plywood panels on a 50x50mm wooden frame structure screwed to the container including varnish and insects protection Supply and installation of two 1200x1200mm sliding windows heavy aluminum frame and 6mm clear glass including cutting the metal walls

Contact Information

Other Detail