|
Regulatory Sign Board (R-1), With The Following Minimum Specifications: Octagonal Side 0.35M, Made Of Galvanized Sheet, Thickness Of 1.6Mm (Approximate Measurements, With Variation Of Up To ± 0.2Mm), Perfectly Flat, Smooth And Free From Burrs Or Sharp Edges, With Application Of Reflective Sticker, With Tube Round Galvanized Steel 2 (With 1.5Mm Thick Wall (Approximate Measurements, 2Mm)), With A Total Length Of 03 Meters, With 02 50X100mm Anti-Rotating Fins In 3.2Mm Plate (Approximate Measurements, Positioned 300Mm From The Bottom End, Plastic Buffer Diameter Of 2 At The Upper End And Base Anchorage In Concrete 15 Mpa, With Footing Size Of 30Cm And Depth Of 60Cm, Installed In A Location Indicated By The Contractor. In Compliance With The Standards Established In The Brazilian Traffic Signage Manual., 25M, Regulatory Signage Plate (R-2), With The Following Minimum Specifications: Triangular Side 0, 90M, 75M, Regulatory Sign Board (R-3, R-4A, R-4B, R-5A, R-5B, R-6A, R-6B, R-6C, R-7, R-8A, R-8B, R-9, R-10, R-11, R-12, R-13, R-14, R-15, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-24A, R-24B, R-25A, R-25B, R-25C, R-25D, R-26, R-27, R-28, R-29, R-30, R-31, R-32, R-33, R-34, R-35A, R-35B, R-36A, R-36B, R-37, R-38, R-39 And R-40), With The Following Minimum Specifications: Circular Diameter Of 0.50 M, Installed In A Location Indicated By The Contractor, Complying With The Standards Established In The Brazilian Traffic Sign Manual. Plate., 12/11/2025 - 08:45:22
|
