Bids Are Invited For Acquisition Of Permanent Equipment To Serve The Emeis And Emefs Affected By The Flood, ... in Brazil

Work Detail

Steel Cabinet - 16 Doors - Steel Wardrobe Cabinet With Sixteen Doors With Louvers For Ventilation, Independent Medium Size Compartments Without Internal Dividers, Closing Of Independent Doors Using Padlock Python. Dimensions And Tolerances: Width: 1230 Mm +/- 30 Mm; Depth: 400 Mm +/- 30 Mm; Height: 1980 Mm +/- 30 Mm; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers., Am-4 - Steel Cabinet - 2 Doors / 4 Shelves - Tall Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Dividers With Independent Doors, Equipped With Four Adjustable Removable Shelves In Each Compartment., Steel File Aq1 - File Steel Slider With Four Drawers Mounted On Telescopic Rails That Allow Total Opening., Swing - 4 Seats - Four Seats (Side By Side) For Children From Three Years Old. Dimensions And Tolerances: Width: 1800 Mm; Minimum Height: 2200 Mm; Length: 4400 Mm; Tolerance: ±10% (Ten Percent)., Fixed Chair - Upholstered, Without Arms, Mounted On A Tubular Steel Frame With Four Feet. Dimensions And Tolerances: Seat Width: 500 Mm +/- 50 Mm; Seat Depth: 460 Mm +/- 10 Mm; Seat Height: 430 Mm +/- 10 Mm; Backrest Width: 400 Mm +/- 10 Mm (Measured At The Most Prominent Point Of The Lumbar Support); Backrest Vertical Extension: 350 Mm +/- 10 Mm; Seat Foam Thickness: Minimum 40 Mm; Backrest Foam Thickness: Minimum 30 Mm. Dimensional Tolerances For Tubes According To Abnt Nbr 6591. Tolerances For Paint Layer: Minimum 40 Micrometers Maximum 100 Micrometers., , Pre 99-25 Permanent Equipment -Sme.Pdf, Swivel Chair With Arms - Upholstered Swivel Chair With Arms And Casters, Equipped With Damping Mechanism And Seat Adjuster And Backrest. Dimensions And Tolerances: Seat Width: 500 Mm +/- 50 Mm; Seat Depth: 460 Mm +/- 10 Mm; Variable Seat Height: Mandatory Range Between 420 Mm And 520 Mm; Backrest Width: 400 Mm +/- 10 Mm (Measured At The Most Prominent Point Of The Lumbar Support); Backrest Vertical Extension: 350 Mm +/- 10 Mm; Seat Foam Thickness: Minimum 40 Mm; Backrest Foam Thickness: Minimum 30 Mm; Dimensional Tolerances For Tubes According To Abnt Nbr 6591; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers., Dining Room Set 1- Cjr1- Set Consisting Of A Table And Four Chairs. Dimensions And Tolerances: Table: 1100 X 680 X 460 X 25.8 Mm (W X D X H Chair: Seat Width: 340 Mm. Seat Depth: 260 Mm. Seat Thickness: 7.2 To 9.1 Mm. Backrest Width: 350 Mm. Backrest Height: 155 Mm. Backrest Thickness: 7 To 9.3 Mm. Seat To Floor Height: 260 Mm. Tolerance: Up To + 2 Mm For Width And Depth, +/- 1 Mm For Thickness And + /- 10 Mm For Height From Seat To Floor., Dining Room Set 3 - Cjr3set Consisting Of A Table And Four Chairs. Dimensions And Tolerances: Table: 1230 X 760 X 590 X 25, +/- 1Mm For Thickness And +/- 10 Mm For Height. Chair: Seat Width: 400 Mm. Seat Depth: 310 Mm. Seat Thickness: 9.7 To 12 Mm. Backrest Width: 396 Mm. Backrest Height: 198 Mm. Backrest Thickness: 9.6 To 12.1 Mm. Seat To Floor Height: 350 Mm. Tolerance: Up To + 2 Mm For Width And Depth, Gira Gira Carousel - Three Seats For Children

Contact Information