Tender For , Supply & Installation Of 3 Phase Isi Marked Submersible Motor Pump Set Offive Star Rating By Be ... in India

Work Detail

, Supply & Installation Of 3 Phase Isi Marked Submersible Motor Pump Set Offive Star Rating By Bee And As Per Is: 8034-2011 (Pump) And Is 9283-2013 (Motor) Or Amended Up To Date Of Approved Make Of Following Duty Condition With Required Accessories Including Making Connection Suitable For Tube Well/Dcb. The Job Includes Lowering Of Motor Pump, Installation Of Complete Fitting & Accessories, Jointing Of Electrical Cables Up To Switch Board, Testing Of Submersible Pump Set And Interconnection Up To Water Mains, Complete In All Respect.15 Kw (20 Hp) And Above, Head Up To 120 Mtr. Rate 5590/Kw , Supply And Fixing Of Electric Control Feeder Panel Comprising Of Suitable Rating Mccb , Fully Automatic Star-Delta Starter, Over Load Relay,Ampere Meter With Cts, Volt Meter, Phase Preventor, Suitable Starting Capacitors, Phase Indicators, Lighting Arrangement Etc Complete Suitable For Three Phase Pump Set. The Panel Should Have Space For Energy Meter ( Supplied By Discom).All These Equipments Shall Be Housed By Panel Box Made Out From 18 Guage M.S. Sheet With Powder Coating. Panel Should Be Ofminimum Size 900 X 600 X 450 Mm With Stand ( Made Of Angle Iron Of Size 35X35x5mm) Duly Bolted/Screwed With Enclosure Box Having 4 Legs, Each Leg’S Length 18" And Double Door Including In Built Locking System.The Legs Should Be Embedded In M-15 Cement Concrete Plat Form.The Size Of Cc Plateform Should Be Equal Or Bigger Than The Base Size Of Panel Having Height Of At Least 200 Mm From Ground Level. The Panel Should Have Opening Of Suitable Size In Front Of Space For Energy Meter With Glass For Meter Reading. The Operation Of Panel Should Be Suitable For On 440 Volt Ac Supply. Above 10 Hp And Up To 15Hp Rate 29204/ Each , Supply & Fixing Of Isi Marked Three Core Pvc Flat Submersible Cableas Per Is 694:1990 Or Amended Up To Date And Conductor As Per Class 5 Of Is 8130:1980Including Making Connection Etc.3 Core 8.0 Sq.Mm Mtr 314.00 , Providing & Lowering In Tubewell Isi Marked Gi Pipe “B" Class As Per Is:1239 Or Amended Up To Date Threaded And Double Flanged (Welded) On Both Ends And Two Number25x3mm Flat Welded On Both Ends Between Pipe & Flange, Rubber Washer & Nut Bolts Etc. Complete In All Respect.65 Mm Dia Rate 765.00/ Mtr , Supply & Fixing Of Pvc Insulated Sheated (Heavy Duty) Armord Electric Cable With Aluminium Conductor For Working Voltage To Is:7098 Part-I/Is :1554 Part-I Applicable. 25.0 Sq.Mm, 3.5 Core Rate 343 Mtr , Supply & Fixing Tube Well Cover Of Ms Sheet 8Mm Thick At Top & 5Mm Thick 100Mm Wide Shroud Around The Edge So As To From A Cap On The Top End Of Casing Pipe With Gi Nipple 45Cm Long & Two Gi Flanges At Both End In 80Mm Size Passing Through A Hole In The Centre Of Ms Sheet. A 25 Mm Socket With End Plug Shall Also Be Welded Over Top Plate (As Per Drawing Enclosed). A Gi Nippale Having Outside Thread Of Size 1/2" (For Installation Pressure Gauge) Shall Be Provided & Welded With 80Mm Gi Nipple Near Top Plate Nipple Shall Be Provided With End Plug. Rate 727.00/Each , Hope Pipe Black 90Mm Dia , Valuve And Other Bolt

Contact Information