|
Under Nandur Madhmeshwar Irrigation Subdivision No. 3, Welding of Distrbutory gates, providing manpower at Branch head of main canal to maintain the flow During rabbi and Summer Rotation period, manpower for cleaning toilet and offices at Gangapur colony, Repairs to Compound wall and offies in colony, etc and repair to VRB on Dy26 of Branch Canal 1,CTB on tail Dy of Branch canal 2 and HR gates of Dy2 and Dy5 of Branch Canal 2 & other necessary works.Taluka Gangapur, District Chhatrapati Sambhajinagar.- Item No.1Carrying out the overall control on the canal/Dy/BC/Minor/CR gates by providing Gauge Inspector personnels to assist Canal Inspector/ departmental staff including watch and ward of canal and operation and regulation of CR , escapes, HR, Outlet gates and ensuring safety of canal/ gates from overflow, breaching , damages to gates, unauthorised opening, ,maintaining gauge record/ guages, keeping good communication with canal officers in day / night during rotation period over particular stretch of canal etc complete as directed by engineer in-charge. (Gauge Inspector) 2 Item No.2JCB for emergencyremoval of shrubs interupting flow of water in distributory and minors,clearing path, operating gates and emergency maintenance of canal 3 Item No.3Prviding X Ray quality M.S. Welding in all positions with required number of runs for M.S. pipes internally and/or externally including gauging wherever necessary, fixing appurtenances and otheraccessories in connection with pipe laying work as per specification using electrodes having weld mark E7018 (Low hydrogen electrodes), including Surface preparation (i.e.removal of scale, cleaning etc)including all materials, labour, equipments, etc complete. 4 Item No.4 RemovingH.M. Debriesfrom canal bed with 15 mtr.Lead and all lift including depositing the excavated stuff etc. Complete as directed 5 Item No.5Providing & fixing in position MS stem rod 40mm dia. including cost required of all materials and labours,threding, welding, anchoring and applying 3 coats of paint etc. Completed. 6 Item No.6 Providing other Consumable materials 7 1) Grease 8 2) Gear oil 9 3) Cardium Compound 10 4) Cotton waste 11 5) Polish Paper 12 6) HandGloves 13 7) Wire brush 14 Item No.7Providing & fitting cast iron wheel of size 590 mm as directed 15 Item No.8Providing & fixing plane flat Rubber seal Of size 82 mmx 20 mm as directed 16 Item No.9Providing & Applaying red oxide primer and synthatic enamel paints as directed 17 Item No.10Providing & fixing6 mm M.S.plate (Plain)including fabrication with lead and all lifts etc.complete 18 Item No.11Providing and laying in Situ cement concrete of grade M-15 oftrap/granite/quartzite/gniess metal for PCC with or without surface reinforcement /RCC concretingpiers, abutments, return wings, etc including placing compacting and Curing including shuttering and scaffoldingetc. complete with initial lead 1.0 km.and all lifts as directed . (A) M-15 (20 MSA) 19 Item No.12Dismantling the old lime concrete or cement concrete including stacking the material with all lifts etc.complete as directed 20 Item No.13 Excavation in all kind of soil including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment filters drains / catch water drains etc. And placing theformation of service road / embankment as directed including cost of all materials, machinery, labour, dressingexcavated stuff neatly in dump area or forbed and sides to required level and profile etc. complete with lead upto 1 km and all lift as directed. 21 Item No.14Excavation in hard murum including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment filters drains / catch water drains etc. And placing the excavated stuff neatly in dump area or forformation of service road / embankment as directed including cost of all materials, machinery, labour, dressingbed and sides to required level and profile etc. complete with lead upto 1 km and all lifts as directed. 22 Item No.15 Excavation in soft rock including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment filters drains / catch water drains etc. And placing the excavated soft rock neatly in dump area or forformation of service road / embankment as directed including cost of all materials, machinery, labour, dressingbed and sides to required level and profile etc. complete with lead upto 1 km and all lifts as directed. 23 Item No.16 Excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia (0.113 cum) minimising damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-spliting / smooth blasting techniques and placing the excavated rocks neatly in approved dump area as directed including cost of all materials, machinery, labour, levelling bed etc. complete with lead& liftsdirected. 24 Item No.17 Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. Complete (excluding royalty of material) 25 Item No.18 Providing and laying in situ cement concrete of grade M-10 of trap/ granite / quartzite / graded metal forfoundation and bedding with Batching Plant & Transit Mixer including shuttering, placing, compacting, curing,etc. complete with all leads & lifts as directed 26 Item No.19 Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite metal for RCC works of retaining walls, piers, abutments, etc. with Batching Plant & Transit mixer, includingshuttering, scaffolding, placing, compacting, curing etc. complete with all leads & lifts as directed. 27 Item No.20Providing and fixing in positionTMT- FE- 500 barreinforcement of various diameter for R.C.C. pile caps,footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis,copings, fins, arches etc. as per detailed designs,drawings and schedules. including cutting, bending,hooking thebars,bindingwithwiresor tack welding and supporting as required complete as directed. 28 Item No.21 Providing and laying R.C.C. NP2pipeOf approved quality with all leads and lifts etc complete. 29 Item No.22Providing casing embankment using selected pervious material from approved borrow areas (Government acquired land) in layers including cost of all materials, machinery,labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 % of Proctor density using vibratory compactor including cost of water etc., complete with lead upto1km and all lifts as directed. 30 Item No.23Providing and laying in situ cement concrete of grade M-20 of trap/granite/gneiss/quartzite/graded metal for RCC works of abutment, wingwalls, returns, transition walls, piers, columns, beams and slabs, diaphragm walls, road slabs trough (Box Culvert) trough for aqueduct, wearing coat,etc..with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts as directed. Plant & Transit mixer, includingshuttering, scaffolding, placing, compacting, curing etc. complete with all leads & lifts as directed. 31 v) Road Slab, kerb, super passage/slab culvert etc. 32 viii) Wearing Coat and other required concrete 33 Item No.24Back filling up to ground level behind the canal structures etc. Complete (without royalty) with suitable materialof approved quality in layers not exceeding 20 cm without disturbing the structure etc. Complete 34 Item No.25 Providing & Laying Expansion / Constuctionjoint with shalitex super expantion pad ( jute fibre 12 mm thick ) including sealling the joint with shalitex sealling compound etc complete as diterected ( for all slab thikness) 35 Item No.26Supplying Mazdoor Unskilled Light Male for Cleaning & Sweeping 36 Item No.27Supplying Water Tanker 37 Item No.28Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 38 Item No.29Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 39 Item No.30Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 40 Item No.31Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 41 Item No.32 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 42 Item No.33Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 43 Item No.34 Providing and fixing in position TMT - FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis,copings,fins,arches etc. as per detailed designs,drawings and schedules. including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete as directed. 44 Item No.35 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 45 Item No.36Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. 46 Item No.37Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete. 47 Item No.38 Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibratoretc. complete. 48 Item No.39 Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. 49 Item No.40Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. 50 Item No.41 RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushedsandVSIgradefinelywashedetc.)includingnetlonmeshbetweeneach gravel/fine aggregate (naturalsand/crushedsandVSI grade finely washedetc.) medialayer includingcoveringwithRCCslab,manholeframe&cover,PVCrungsetc.including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rateshallbeinclusiveofalllabour,material,wastage,scaffolding,transportation,taxes, includingallleads,liftsatalllevels.Allmaterialshouldbeofapprovedmake.Allworks complete as per the drawing, technical specification and direction of the Engineer in charge 51 Item No.42 ProvidingandfixingP.V.C.Rainwaterpipesof110mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket withsolvent cementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. 52 Item No.43 Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH-PL/STP 53 Item No.44Supplying & erecting MS pole bracket for guarding/LT OH line, fabricated from angle iron 50x50x6mm and 550mm long for necessary nos. of provided insulators, and erecting on pole with 50x6mm clamp complete as per specification no. OH-PL/BKT 54 Item No.45Supplying and erecting 3 phase 4 core 16 sq.mm. (3x16+1x25) Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC 55 Item No.46Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 classhaving minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty. 56 Item No.47 Free Standing Table @ 1500Lx600Dx750HTProviding and fixing Table of Size 1500 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, 57 Item No.48 Free Standing Table @ 1350Lx600Dx750HT Providing and fixing Table of Size 1350 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board.All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :-Metal Powder Coated - Black Color, CPU TROLLEY :-Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board, 58 Item No.49Public Seating Chair. 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 59 Item No.50Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery 60 Item No.51 Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweepcomplete erected in position as per specification no. FG-FN/CF 61 Item No.52 Pedestal Unit @ 420Lx450Dx650HT Providing & Fixing of PEDESTAL @ 420Lx450Dx650HT :- To be made out of Complete Membrane consist of three Drawers as per drawing. 62 Item No.53Provision of Inspection vehicle
|
