Prior Information Notice Without Call For Competition Hydraulic PressesDesign And Manufacture Of Isothermal Die StackDescription The University Has An Open Die Closed Die Isothermal Forging Press Due To Be Installed At Their Afrc Site And Have A Requirement For An Isothermal Die Stack To Be Installed Into This Forging Press In Order To Fulfil This Requirement The University Considers That The Design Of The Isothermal Die Stack Shall Be Required To Meet The Undernoted Conditions The Die Stack Requires To Be Designed To Provide A Thermal Gradient Across The 800 Mm Height Of The Die Stack Top And Bottom Of Over 1 050 C For Example 1 300 C At The Tooling End Of The Die Stack Reducing To 250 C At The Base The Difference Being 1 050 C This Thermal Gradient Is Assisted By A Water Cooling System Which Is Fed Into The Die Stack Where Required To Aid Cooling Of The Base Ends Of The Upper And Lower Columns The Isothermal Die Stack Is To Have The Capability Of Operating In Temperatures Up To 1 300 C And Be Able To Retain ItS Hot Strength At This Temperature The Isothermal Die Stack Is To Provide A Progressively Increasing Thermal Barrier To The Transmission Of Heat From The Tool Area To The Base Of The Die Stack The Interface Temperature At The Base Of The Die Stack Should Be No More Than 250 C Whilst The Top End Of The Die Stack Is Operating At 1 300 C The Isothermal Die Stack Is To Be Capable Of Operating At Loads Of Minimum 20 000 Kn Or 2000 Tons At 1 300 C As Described Above Without Plastic Deformation Interested Parties Should Note That This Detail Is Supplied For Information Only And Should Not Be Considered As A Specification For Any Future Contract
Contact Information
Other Detail
View Notice Now...
Fill Detail for Getting Instant Access
Download Tender Document / Tender Notice
Dear Sir,
Warm Greetings from TenderDetail.com !!
We have received Tender Document request for the TDR No : 20637882
Tender Notice along with it's Attachments ( Tender Document / Scan Image of News Paper)
sent to your Email Address :.
Please check your email for Tender Document.